Canon manual Connecting to Audio in Terminals SX7/X700

Connecting to AUDIO IN Terminals (SX7/X700)

Connect an audio cable to the AUDIO IN terminal corresponding to the input image signal if you want to use the projector’s speaker.

Audio cable

AV equipment

AUDIO OUT terminal

(RCA terminal) (Stereo mini jack)

Commercial audio cable

(RCA/Stereo

mini jack)

Audio input terminal (AUDIO IN)

You can input an audio signal corresponding to 3 image input systems.

Connect to the AUDIO IN ter- minal corresponding to the type of the input image signal.

(Stereo mini jack)

for DEGITAL IN/ANALOG IN-1

for ANALOG IN-2

for VIDEO IN/S-VIDEO IN

Projector

PROJECTING AN IMAGE FROM AV EQUIPMENT

SX7/X700

zThe speaker outputs the audio signal corresponding to the selected image signal.

zUse an audio cable without a built-in resistor. Using an audio cable with a built-in resistor turns down the sound.

zConnect the audio cable between the AUDIO OUT terminal and an external audio-visual equipment if you want to output the audio signal to the audio-visual equipment (P66).

zThe built-in speaker is monaural.

65