Canon X700, SX7 manual DVI cable, BNC cable

zBefore connecting cables, turn off both the projector and computer.

zIt may project an image inappropriately when projecting the digital PC signal in 1280 x 1024 or 1400 x 1050 depending on the type of computer or DVI cable (SX7/SX6/SX60).

zThe USB terminal is used to use the remote control as the computer mouse. An image can- not be projected simply by connecting the USB cable.

DVI cable
To monitor output terminal
(DVI terminal)
	Computer
	Optional DVI digital cable
	[LV-CA29]
Input Terminal-1
(DIGITAL IN)	Projector
Input Signal: Select [DIGITAL PC] or
	[ANALOG PC-1] (P46)

5-BNC cable
To monitor output terminal
(5-BNC output terminal)
	Computer	PROJECTINGANIMAGEFROM
	Extension cable
Commercial 5-BNC	Commercial 5-BNC	THE
cable (for 5-BNC/	extension cable
mini D-Sub 15-pin)		COMPUTER
Input Terminal-2	Projector
(ANALOG IN-2)
Input Signal: Select [ANALOG PC-2] (P48)
		35