Adjusting the Focus

You can adjust the focus.

Follow the steps below to adjust the focus manually if the Auto setup function (Auto focus) does not adjust the focus appropriately.

1 Press the [FOCUS] button.

The Focus adjustment window appears.

2 Press the POINTER buttons to adjust the focus.

Rough adjustment:

[<] [<]

Fine adjustment :

[<] [>]

zYou can activate the Auto focus function if you press the [AUTO SET] button now. However, if you select [16:9 D. image shift] for [Screen aspect], the auto focus function will be disabled.

3 Press the [OK] button.

z The projected image may be out of focus if the projection distance is beyond the range of 1.2 m (3.9') to 9 m (29.5'). Move the projector installation position if such is the case (P30).

PROJECTING AN IMAGE FROM THE COMPUTER

49

Page 49
Image 49
Canon X700, SX7 manual Adjusting the Focus