Supplying Power
Battery Care
Caution:
•Charge only with specified charger.
•Charge the Battery within an ambient temperature range of 10 °C (50 °F) and 30 °C (86 °F).
•The Battery may be warm after charging or just after use. This is normal.
•Do not use an insufficiently charged or worn out Battery.
•If charging is done in extreme low or high temperatures, Battery charge time increases.
Safety precautions:
•Do not place the Battery near, or dispose of in fire.
•Do not directly connect (short circuit) the positive (+) and negative
•Never attempt to disassemble or reassemble the Battery.
To avoid damage to the Battery:
•Do not drop or jar the Battery.
•Use the Battery with specified models only.
•If the Battery is used in extremely high temperatures, a safety device will automatically prevent operation.
To ensure longer battery life:
•While not in use, remove Battery from the Palmcorder and AC Adaptor and store in a cool, dark, dry place. If you leave the Battery in the Palmcorder or on the AC Adaptor, the Battery will no longer be rechargeable.
•Keep the Battery terminals clean.
U.S.A. CONSUMERS: ATTENTION:
A lithium ion/polymer battery that is recyclable powers the product you have purchased. Please call
Use AC Adaptor
1
2
BATTERY
RELEASE
DC IN Terminal
1 Slide the Battery downward while sliding BATTERY RELEASE to remove the Battery Pack. (p. 15)
2 Insert the DC Cable into the DC IN Terminal.
3 Connect the other end of the DC Cable to the AC Adaptor as shown.
4 Plug in the AC Adaptor.
•The POWER Lamp on the AC Adaptor lights up.
1
3
DC Cable (Supplied)
POWER
Lamp
Note
• When not in use, unplug the AC Adaptor from the AC outlet. (AC Adaptor consumes 1 W of electric power when plugged into an AC outlet even when not in use.)
2DC Output Connector
16