12
34
1
Attaching the Lens Cap
To protect the Lens surface, attach the Lens Cap.
1Pass the loop of the Lens Cap Cord through the Lens Cap Installation Hole on the Movie Camera.
2Pass the opposite side of the Lens Cap Cord through the cord’s hoop.
3Pull the Lens Cap to the direction of the arrow.
4Attach the Lens Cap.
≥The removed Lens Cap can be hooked onto the Grip Belt 1. (When you are not recording, be sure to keep the Lens Cap attached to the Lens for protection.)
≥If the supplied Lens Hood for MEGA Still Picture Recording is attached, the Lens Cap cannot be attached.
1
2
2
1
OPEN/EJECT 
3
1
R E C
SAVE
Adjusting the Grip Belt
Adjust the length of the Grip Belt to the size of your hand.
1Pass your hand through the Grip Belt and adjust its length.
2Fold back the end of the Grip Belt to securely fasten the velcro tape closure.
≥The Grip Belt can also be adjusted in SD Camera Style.
~~~~~~~~~~~~~~~~~~~~~~~~~
Inserting a Cassette
When power is supplied to the Movie Camera, the Cassette can be taken out without turning the Movie Camera on.
1Slide the [OPEN/EJECT] Lever to open the Cassette Compartment Cover.
2Insert a Cassette.
3Close the Cassette Compartment Covers to lock the Cover.
ªAccidental Erasure Prevention
Opening the accidental erasure prevention slider 1 on the cassette (by sliding it in the [SAVE] arrow direction) prevents recording. To enable recording, close the accidental erasure prevention slider (by sliding it in the [REC] arrow direction).
≥For other notes concerning this item, see page 46.
11