1, , , 4, 5, 7
, 2, 3W.BMF/VOL/JOG./SHUTTER/IRIS/
2 | 1 |
| PUSH |
1, 6,
8
|
|
|
|
|
|
|
|
|
| EDIT |
|
|
|
| 640 | 1200 | 640 |
|
| |
3 |
|
|
| 1200 No.5 | 1 | |
640 | 640 | |||||
|
|
| 9SEC |
| 2 | |
|
| PRESS MENU TO RETURN | ||||
|
|
|
|
|
|
|
4
M.SLIDE
56
SLIDE | SLIDE |
Slide Show
The recorded still pictures in the Card can be played back like a Slide Show. You can set up a Slide Show or change the content.
To Select Pictures to Play Back in Your Slide Show
1After set the [PICTURE/MPEG4/VOICE] Switch to [PICTURE], set [CARD FUNCTIONS] >> [CARD EDITING] >>
[SLIDE SHOW] >> [YES].
≥Slide Show editing screen appears.
2Set [EDIT] >> [YES].
3Turn the [PUSH] Dial to select a picture and then press the dial.
4Turn the [PUSH] Dial to select playback order and then press the dial.
≥This step is skipped when there is no picture that has set for the Slide Show.
5Turn the [PUSH] Dial to adjust the playback time and then
press the dial.
≥The Playback Order Indication 1 and the Playback Time (Second) Indication 2 appear.
≥The [¥] Indication 3 is displayed to the picture set.
≥To select the next picture, repeat the Steps 3 to 5 above.
6Press the [MENU] Button to end the setup.
7After set [SLIDE SHOW] >> [PRESET], Press the [MENU] Button.
8Press the [1] Button.
≥The [M.SLIDE!] Indication is displayed. 4
To Play Back All the Pictures Continuously
After setting the [SLIDE SHOW] to [ALL], press the [1] Button. ≥The [SLIDE!] Indication is displayed. 5
≥All pictures are played back for approximately 6 seconds each, from the first to the last recorded picture, and playback then stops.
To Pause the Slide Show
Press the [;] Button.
≥The [(M.) SLIDE;] Indication is displayed. 6
To Stop the Slide Show
Press the [∫] Button.
To Verify the Selected Picture
Set [CARD FUNCTIONS] >> [CARD EDITING] >> [SLIDE SHOW] >> [YES]
>>[VERIFY] >> [YES].
≥Only the selected pictures are displayed in
To Delete the Selected Picture
1Set [CARD FUNCTIONS] >> [CARD EDITING] >> [SLIDE SHOW] >> [YES].
2Set [DELETE] >> [YES].
3Select the picture you want to delete and press the [PUSH] Dial.
To Reset the Slide Show Setup
Set [CARD FUNCTIONS] >> [CARD EDITING] >> [SLIDE SHOW] >> [YES]
>>[RESET] >> [YES] >> [YES]. ≥Slide Show settings are reset.
≥For other notes concerning this item, see page 50.
39