Controls and their functions
Monitor output selector switch [MONI SEL]
This is used to select the images (Y, NAM, R, G, B) which are to be output from the monitor output connector.
ND filter selector knob
This is used to adjust the optical filter manually when LOCAL has been selected as the filter setting.
1: CAP, 2: Through, 3: 1/4, 4: 1/16, 5: 1/64
CC filter selector knob
This is used to adjust the optical filter manually when LOCAL has been selected as the filter setting.
A: 3200K, B: 4300K, C: 6300K, D: Cross, E: DF0
Gain selector switch [GAIN]
This is used to select the gain for the camera images. It is not effective when the CCU is connected to the camera.
Camera output selector switch [OUTPUT]
This is used to select the video output (CAM, BAR or TEST).
It is not effective when the CCU is connected to the camera.
White balance memory selector switch [W.BAL]
This is used to select the white balance memory. Data can be recorded in A or B.
The factory settings are established when the switch is set to PRST.
It is not effective when the CCU is connected to the camera.
Assignable switch [USER 1, 2, 3]
Using the setting menu, user settings can be assigned to this switch.
SD card connector [SD CARD]
The SD card (optional accessory) is inserted here. For the recording items, refer to the “Table of the adjustment setting ranges”.
(SDHC cards or SD cards with a memory size of 2 GB or more cannot be used.)
Menu switch [MENU]
When this switch is pressed, the camera’s user menu is output; when it is pressed again, the menu screen display is cleared.
JOG dial button
Turning the JOG dial while the menu screen is displayed moves the cursor to the setting items. The menu settings are established by operating this dial button.
For details on the menu operations, refer to the section on the menu operations.
Electronic shutter selector switch [SHUTTER]
This is set to ON when the electronic shutter is to be used. When it is set to the SEL position, the shutter speed is switched in the preset range and the mode is also switched.
It is not effective when the CCU is connected to the camera.
AWB/ABB start switch [AUTO W/B BAL]
This is used for conducting automatic white balance adjustments (AWB) or automatic black balance adjustments (ABB).
It is not effective when the CCU is connected to the camera.
Lens connector [LENS]
The lens cable is connected to this connector.
Front MIC1 connector [MIC1]
A microphone (optional accessory) is connected here. The power supply for the microphone can be connected from this connector. What kind power is to be supplied is set using the MIC1 power selector switch.
VF connector [VF]
The 2˝ viewfinder cable is connected to this connector.
Rear VF connector
This
Back light switch [LIGHT]
This light switch is used to make it easier to read the characters on the camera’s back panel.
The brightness can be adjusted using the camera menu.
MIC1 Talk LED [TALK]
This LED lights up green when the INCOM1 MIC is operational.
It blinks when the MIC has been forcibly set to OFF by a remote control operation.
MIC2 Talk LED [TALK]
This LED lights up green when the INCOM2 MIC is operational.
It blinks when the MIC has been forcibly set to OFF by a remote control operation.
MIC2 selector switch [LINE/MIC]
This switch is used to select LINE or MIC for the input signals.
Buildup unit I/F
This signal interface connector is used to connect the Buildup unit.
10