Panasonic AK-HC3500P operating instructions Table of adjustment setting ranges, Operation

Table of adjustment setting ranges

Operation

Menu	Item	Adjustment setting range	Initial value	Items recorded on SD cards
VF Setting1				
	Side Modu SW	ON, OFF	OFF	No switching from the SD card to the
				camera settings possible while the
				buildup unit is connected.
				
	Side Modu LVL	0 to 31	31	No switching from the SD card to the
				camera settings possible while the
				buildup unit is connected.
				
	Zone Mark	OFF, 4:3, 13:9, 14:9, 15:9, 16:9	OFF	No switching from the SD card to the
				camera settings possible while the
				buildup unit is connected.
	Safety Mark1	16:9, 15:9, 14:9, 13:9, 4:3, OFF	OFF	
	Safety Area1	80 %, 90 %, 93 %, 100 %	93 %	
	Safety Mark2	16:9, 15:9, 14:9, 13:9, 4:3, OFF	OFF	
	Safety Area2	80 %, 90 %, 93 %, 100 %	93 %	
	Center Mark	ON, OFF	OFF	
	Center Mark SEL	1 to 4	1	
	Line Width	1 to 3	1	
	Marker Level	100 %, 75 %, 50 %	100 %	
VF Setting2	VF DTL	0 to 23	10	
		12.4M, 12.5M, 12.7M, 12.9M, 13.0M, 13.3M,
		13.6M, 13.9M, 14.2M, 14.6M, 15.0M, 15.5M,
	HD Peak FREQ	16.1M, 16.7M, 17.3M, 18.0M, 18.6M, 18.8M,	12.4M	
		19.0M, 19.2M, 19.5M, 19.9M, 20.3M, 20.9M,
		21.5M, 22.4M, 23.6M, 25.4M, 28.6M, 37.1M
	HD Offset Gain	0 to 5	0	
	HD Crisp	0 to 63	30	
	D1 Peak FREQ	2.0M, 2.3M, 2.7M, 3.4M, 4.5M, 6.8M, 13M	6.8M	
	D1 Offset Gain	0 to 5	0	
	D1 Crisp	0 to 63	30	
	VBS Peak FREQ	2.0M, 2.3M, 2.7M, 3.4M, 4.5M, 6.8M, 13M	6.8M	
	VBS Offset Gain	0 to 5	0	
	VBS Crisp	0 to 63	30	
Cursor	Cursor	OFF, ON	OFF	
	Cursor Memory	ADJ, 1, 2, 1+2	ADJ	
	H Position	0 to 255	127
	V Position	0 to 255	127
	Width	0 to 255	127
	Height	0 to 255	127
	BOX/CROSS	BOX, CROSS	BOX
	Store Memory	MEM1, MEM2	MEM1
	EXECUTE	Yes?, No?	—
VF Display1	F Number	OFF, ON	OFF	
	Zoom	OFF, ON	OFF	
	Focus	OFF, ON	OFF	
	Extender	OFF, ON	OFF	
	MONI OUT	OFF, ON	OFF	
	Filter	OFF, ON	OFF	
	M Gain	OFF, ON	OFF	
	Shutter	OFF, ON	OFF	
	5600K	OFF, ON	OFF	
	Audio Level	OFF, ON	OFF	
VF Display2	OPT Level	OFF, ON	OFF	
	RET Select	OFF, ON	OFF	
	Status	OFF, ON	OFF	
	Status(AUTO)	OFF, ON	OFF	
	Field Rate	OFF, ON	OFF	
	Voltage	OFF, ON	OFF	
	WFM	OFF, ON	OFF	
	White CH	OFF, ON	OFF	
Setting1	FAN Power	ON, OFF, AUTO	ON
	FAN Mode	NORM, LOW	NORM
	CALL+R_TALLY	ON, OFF	OFF	
	CALL+T_TALLY	ON, OFF	OFF	
	PinP Mode	—	—

30