Mounting the lens
1 Raise the lens clamp lever, and remove the mount cap.
Mount cap | Lens clamp lever |
2 Align the guide pin on the lens with the groove at the top center of the lens mount, and mount the lens.
Groove
Guide pin
4 Insert the cable into the cable clamp and connect it to the lens connector.
Lens connector
Notes
For details on handling the lens, refer to the instructions that accompany the lens.
Depending on the lens mounted, it may be necessary to perform the following lens and camera adjustments.
1.Flange back adjustment for the lens
2.Auto iris operation speed adjustment for the lens
3.White shading adjustment for the lens (performed using the controls on the camera)
3 Lower the lens clamp lever to clamp the lens in place.
Lens clamp lever
11