Panasonic AG-DVX100P manual Camera Setup screen, SW Mode screen

Item/

Description of settings

(display mode)

SYNCRO SCAN

For adjusting the shutter speed of synchro

(Camera)

scan used when shooting TV screens, etc.

If the OPERATION lever is left tilted in the

3 or 4 direction, the speed at which the

setting changes is increased, and a beep is

heard.

O Progressive mode OFF:

1/60.3---1/250.0

O Progressive mode 30P:

1/30.1 ---1/48.0---1/250.0

O Progressive mode 24P or 24PA:

1/24.1 ---1/48.0---1/250.0

ASPECT CONV

For selecting the aspect ratio of the images

(Camera)

to be recorded.

NORM:

The images are recorded in the standard

4:3 mode.

LETTER BOX:

The aspect ratio is set to the 16:9 mode,

and the images are recorded in this

mode. Black bands are recorded at the

top and bottom of the screen.

COLOR BAR

For setting the color bar display to ON or

(Camera)

OFF. (Color bars are not displayed in the

progressive mode.)

OFF

ON

O Even when the color bar display has

been set to ON, it will return to OFF

when operation is switched to the VCR

mode or the power is turned off.

SETUP

For setting whether to add the setup level

(Camera)

(black level).

0%:

The setup level is not added.

7.5%:

The 7.5% setup level is added for

recording.

Item/

Description of settings

(display mode)

MID GAIN

For setting the gain value which is to be

(Camera)

allocated to the M position of the GAIN

switch.

0 dB, 3 dB, 6 dB, 9 dB, 12 dB

HIGH GAIN

For setting the gain value which is to be

(Camera)

allocated to the H position of the GAIN

switch.

0 dB, 3 dB, 6 dB, 9 dB, 12 dB

ATW

For setting the ATW (Auto Tracking White)

(Camera)

function which is to be allocated to the

WHITE BAL switch.

OFF:

The ATW function is not activated.

However, if it has been set in the AUTO

button or USER button, it will follow the

operation of the button concerned.

Ach:

The ATW function is activated when the

WHITE BAL switch has been set to the A

position.

Bch:

The ATW function is activated when the

WHITE BAL switch has been set to the B

position.

PRE:

The ATW function is activated when the

WHITE BAL switch has been set to the

PRST position.

HANDLE ZOOM

For setting the zoom speeds which are to

(Camera)

be allocated to the positions of the

HANDLE ZOOM switch.

L/OFF/H:

LOW/OFF/HIGH are set to the 1/2/3

positions. (At OFF, no zoom operations

are performed.)

L/M/H:

LOW/MID/HIGH are set to the 1/2/3

positions.

IRIS DIAL

For setting the rotational direction of the

(Camera)

IRIS dial and iris control (in the MANUAL

IRIS mode).

DOWN OPEN:

The iris opens when the IRIS dial is

turned downward.

UP OPEN:

The iris opens when the IRIS dial is

turned upward.