Panasonic AG-DVX100P manual Recording Setup screen

Item/

Description of settings

(display mode)

REC SPEED

For selecting the recording time mode.

(Camera)

SP : SP (standard play) mode

(VCR)

LP : LP (long play) mode

AUDIO REC

For selecting the system for converting the

(Camera)

recording to PCM audio.

(VCR)

12 bit : 12-bit/32kHz

16 bit : 16-bit/48kHz

MIC ALC

For setting the mic level automatic control

(Camera)

function to ON or OFF.

OFF

ON

Audio distortion caused by excessively high

input level can be minimized by selecting

ON for this item.

O The recording level of the audio signals

must be adjusted using the AUDIO

controls, irrespective of this setting.

MIC GAIN 1

For setting the input level of the external

(Camera)

microphone which is connected to the

INPUT 1 connector.

-50 dB

-60 dB

MIC GAIN 2

For setting the input level of the external

(Camera)

microphone which is connected to the

INPUT 2 connector.

-50 dB

-60 dB

1394 TC REGEN

For selecting the time code to be recorded

(VCR)

when recording the signals of a component

connected to the DV connector.

OFF:

The signals are recorded using the time

code which was set using the TC MODE

item, TCG item and FIRST REC TC

item.

ON:

The signals are recorded using the time

code of the signals which have been

input to the DV connector.

O When ON has been selected as this

item’s setting, this setting takes

precedence over the TC MODE item,

TCG item and FIRST REC TC item

settings.

O When no signals are supplied to the DV

connector, the TC MODE item, TCG item

and FIRST REC TC item settings are

followed.

TC MODE

For selecting the time code correction

(Camera)

mode in which the time code of the internal

(VCR)

time code generator is to be recorded.

DF :

The drop frame mode is used.

NDF : The non-drop frame mode is used.

O When the progressive mode has been

set to 24P or 24P (ADV), the non-drop

frame mode is established regardless of

this item’s setting.

Item/

Description of settings

(display mode)

TCG

For setting the operation mode in which the

(Camera)

internal time code generator is to be run.

(VCR)

FREE RUN:

The internal time code generator is run

regardless of the operation mode.

REC RUN:

The internal time code generator is run

during recording.

FIRST REC TC

For selecting the time code which is to be

(Camera)

recorded when recording is started.

(VCR)

REGEN:

Recording proceeds in such a way that

the time code continues on (is

regenerated) from the time code on the

tape.

PRESET:

The time code is not regenerated from

the time code on the tape.

The time code is recorded using the

value set in the TC PRESET item

serving as the initial value.

However, the time code is forcibly

regenerated when shooting with frame-

to-frame continuity has been performed.

TC PRESET

For setting the initial value of the time code

(Camera)

to be recorded.

(VCR)

This item’s setting is valid when PRESET

has been selected as the setting for the

FIRST REC TC item.

O When the progressive mode has been

set to 24P or 24P (ADV), set the frame

value to 0 or to a multiple of 5. If any

other value is set, the time code

recorded will shift.

1394 UB REGEN

For selecting the user’s bit to be recorded

(VCR)

when recording the signals of the

component connected to the DV connector.

OFF:

The user’s bit selected for the UB MODE

item is used for the recording.

ON:

The user’s bit of the signals input to the

DV connector is used for the recording.

O When ON has been selected as this

item’s setting, this setting takes

precedence over the UB MODE item

setting.

O The user’s bit is not recorded if the

signals do not contain the user’s bit

information.

O When no signals are supplied to the DV

connector, the UB MODE item setting is

followed.