Panasonic AG-DVX100P manual Storage tips

Page 9

Storage tips

When storing the camera recorder, eject the cassette from the camera recorder and remove the battery.

Store all components in a location where the humidity level is low and the temperature is relatively stable.

Recommended temperature range:

59°F to 77°F (15°C to 25°C)

Recommended relative humidity:

40% to 60%

Camera recorder

OWrap the camera recorder in soft cloth to keep out dust.

Battery

OThe battery’s service life is reduced if the battery is stored in a location where the temperature is extremely high or extremely low.

OIf the battery is stored in a location exposed to high concentrations of oily vapors and/or dust, the terminals may corrode or other problems may develop, possibly resulting in malfunctioning.

ODo not bring metal objects (such as necklaces or hairpins) into contact with the battery terminals. The terminals may short circuit and generate heat, and touching them in this condition may cause severe burns.

OStore the battery only when it is fully discharged. It is recommended that the battery be charged once a year when it is being stored long-term and that it be placed back in storage after it has been fully discharged using the camera recorder.

Cassette tapes

OBefore storing a cassette tape, rewind the tape to its start. If a tape that has been stopped at some interim point along its length is stored for six months or more (this period of time differs depending on the storage conditions), tape slack will develop. Always rewind the tape to its start before storing it.

OReturn cassette tapes to their original cases before storing them. Dust, direct sunlight (ultraviolet rays), humidity and other such conditions may damage the tapes. Dust contains particles of hard mineral substances, and if dust should enter inside a cassette, these particles may in turn be transferred to the heads and other parts, possibly resulting in their damage. Make a habit of always returning the cassettes to their original cases.

OFast forward and rewind cassette tapes once every six months. If tapes are kept wound up for more than a year, they may become warped or distorted due to the expansion and contraction caused by changes in the temperature and humidity. In addition, layers of tape may stick together.

ODo not place cassette tapes near matter or equipment which emits strong magnetic fields.

OExtremely fine magnetic particles are contained in the coating of the tape surface, and it is here that the signals are recorded. Magnetic necklaces, toys and other such items may have stronger magnetic fields than suspected, which may erase recordings or give rise to noise in the pictures and sound.

9

Image 9 Contents
Digital Video Camera Recorder Indicates safety information Important Safeguards Antenna Lead in Wire Contents Accessories Precautions for use AC adapter and batteryWhen carrying the camera recorder, take care not to drop it LCD Storage tips Parts and their functions White BAL switch Gain switchPrst preset CAMERA/VCR button and lampManual AutoRemote control sensor front Menu button ND Filter switchIndex button Auto buttonMIC LineManu ServoINPUT2 INPUT1Counter Remote control unit FF/C button VCR operation buttons C/REW buttonPlay button Still ADV buttons E, DInstalling the battery Remote control unitRemote control unit settings Setting methodConnect the AC cable to the power outlet Charging the batteryCharging time Continuous recording time Approx 80 minutesSupplying power from the AC adapter Mounting the batteryBattery eject button Connect the AC adapter correctly as shown in the figureCassette tapes Inserting a cassette tapeTo prevent accidental erasure of recordings Attaching the shoulder strap Adjusting the hand strapMounting the lens hood Removing the lens hoodViewfinders Using the viewfinderDo not point the viewfinder’s eye-piece at the sun Attaching the eye cupUsing the LCD monitor Setting the calendar Charging the internal battery Setting the electronic shutter Shutter speeds which can be setSynchro Scan White balance and black balance Adjusting the white balanceLOW Light Level OverStandard 60i mode Adjusting the black balanceProgressive mode ATW Auto Tracking White functionSetting the user’s bit Setting the time dataSetting the time code OTC Mode item Otcg item Ofirst REC TC item OTC Preset itemHow to select the TC Preset item setting Scene files Changing the scene file settings Save Camera mode Setting menusVCR mode Operation methodConfiguration of setting menus Menus in the camera modeMenus in the VCR mode Scene File screen SW Mode screen Camera Setup screenAuto SW screen Inputs and audio tracks recorded Playback Functions screenRecording Setup screen AV IN/OUT Setup screen Display Setup screen Other Functions screen Camera mode and VCR mode Screen displaysLOW Light Remote Remaining battery charge display Date and time displayRemaining tape display CHK Copy Inhibited Unplayable Tape Other FormatUnable to A. DUB LP Recorded Incompatible TapeVCR mode Search number displayL U M E Display item Mode CHK button Other Display item setting Selecting the displayALL Partial OFF Connecting external components Input 1 InputMicrophone holder Microphone holder adapter Preparation and inspections ShootingRegular shooting REC checkFace-to-face shooting Using the User buttonsIndex recording Intermittent recordingBackup recording 24P mode 30P mode24P advance mode Progressive shootingNormal playback PlaybackTape blank search Variable speed searchVideo heads CondensationPower supply-related problems Troubleshooting Q&ABattery-related problems Problems during normal video recordingEditing-related problems Problems during various kinds of video recordingDisplay-related problems Playback-related problems videoOther types of problems Playback-related problems audioQ3 The remote control unit does not work Q2 More than one recorded stream of sound is heardMaintenance Viewfinder maintenanceIndex mark Eye cup holder Specifications Input 1, Input DC Input PhonesCAM Remote Memo Panasonic Broadcast & Television Systems Company