Playback mode
| Playback on TV |
oSet to Tape Playback Mode.
1 During playback, move the joystick up to select the [1_/I I] icon to pause playback.
Images recorded by this Camcorder can be played back on a TV.
elnsert a recorded tape or card into this Camcorder.
@
2 Push the -_/VOL+] lever.
W T
Towards [T]: normal direction
Towards [W]: reversed direction
olf you keep pushing the lever, then the images will continuously be played back frame by frame.
oThe pause icon appears for an instant. Continuous
•To return to normal playback
Move the joystick up to select the [1_/! l] icon to start playback.
=Be sure that the power of the unit is turned off before connecting it to a TV.
1 Connect the Camcorder and a TV.
• Connect the Camcorder and a TV by using the AV cable O.
2 Turn on this Camcorder and set the mode dial to the Tape Playback Mode (or Card Playback Mode).
3 Select the input channel on the TV.
If the images are not played back correctly on the TV (e.g. they are displayed vertically), perform the menu operations in accordance with the aspect ratio of the TV monitor.
Set [SETUP] >> [TV ASPECT] >> [16:9] or [4:3].
4 Move the joystick up to select the [1_/ ] icon to start playback.
eThe image and audio are output on the TV.
5 Move the joystick down to select the [m] icon to stop playback.
Use the AC adaptor to free you from worrying about the battery running down.
•If the image or audio from this
Camcorder is not output on the TV
•Check that the plugs are inserted as far as they go.
•Check the [12bit AUDIO] settings.
Check the TV's input setting (input switch).
(For more information, please read the operating instructions for the TV.)
41
LSQT1121