Panasonic PV-GS80 operating instructions Prepare spare batteries when going out for recording

Page 67

Others

Extremely high temperatures or low temperatures will shorten the life of the battery.

If the battery is kept in a high-temperature, high- humidity, or oily-smoky places, the terminals may rust and cause malfunctions.

To store the battery for a long period of time, we recommend you charge it once every year and store it again after you have completely used up the charged capacity.

Dust and other matter attached to the battery terminals should be removed.

Prepare spare batteries when going out for recording.

Prepare batteries appropriate to 3 to 4 times the period during you want to record pictures in. In cold places such as a ski resort, the period

during which you can record pictures is shortened.

When you travel, do not forget to bring an AC adaptor so that you can recharge the batteries

at your destination.

If you drop the battery accidentally, check to see if the terminals are deformed.

• Attaching a deformed battery to the Camcorder or AC adaptor may damage the Camcorder or AC adaptor.

Do not throw old battery into fire.

• Heating a battery or throwing it into a fire may result in an explosion.

If the operating time is very short even after the battery has been recharged, the battery has worn out. Please purchase a new battery.

About the AC adaptor

If the battery is warm, charging requires more time than normal.

If the temperature of the battery is extremely high or extremely low, the [CHARGE] lamp may continue flashing, and the battery may not be charged. After the battery temperature has decreased or increased sufficiently, recharging starts automatically. So, wait for a while. If the lamp still continues flashing even after the recharging, the battery or AC adaptor may be faulty. If so, please contact a dealer.

If you use the AC adaptor near a radio, radio reception may be disturbed. Keep the AC adaptor 1 m (3.3 feet) or more away from radio.

When using the AC adaptor, it may generate whirring sounds. However, this is normal.

After use, be sure to pull out the AC Cable from the AC Jack. (If they are left connected, a minute amount of current is consumed.)

Always keep the electrodes of the AC adaptor and battery clean.

About the cassette

Never place the cassette in a high temperature place.

The tape may be damaged, producing mosaic-like noise at the time of playback.

When storing the cassette after use, be sure to rewind the tape to the beginning and take it

If the cassette is left for more than 6 months

(depending on the storage condition) in the Camcorder or stopped midway, the tape may sag and be damaged.

Once every 6 months, wind the tape to the end and then rewind it to the beginning. If the cassette is left for 1 year or longer without winding or rewinding, the tape may be deformed by expansion or shrinkage attributable to

temperature and humidity. The wound tape may stick to itself.

Dust, direct sunlight (ultraviolet rays), and humidity may damage the tape. Such usage

may cause damage to the Camcorder and the heads.

After use, be sure to rewind the tape to the beginning, put the cassette in the case to

protect it from dust, and store it upright. Keep the cassette away from strong

magnetism.

Apparatus using magnets such as magnetic necklaces and toys have magnetic force that is stronger than expected, and they may erase the contents of a recording or may increase noise.

About the card (PV-GS85 only)

When inserting or removing the card, always set the [OFF/ON] switch to [OFF].

When the access lamp is illuminated (During access to the card), do not pull out the card, rotate the mode dial, turn off the power, or cause any vibrations or impact.

Do not leave the card in places where there is high temperature or direct sunlight, or where electromagnetic waves or static electricity are easily generated. Moreover, do not fold or drop the card.

The card may break or the contents of the card may be destroyed or erased.

Do not touch the terminals on the back of the card.

Electrical noise, static electricity, or failure of the Camcorder or the card may damage or erase the data stored on the card. We recommend

saving important data on a personal computer

by using a USB cable, PC card adaptor, and USB reader/writer.

67

LSQT1121

Image 67
Contents PV-GS80 Do not Expose this Equipment to Rain or Moisture Following mark and symbols are located on bottom of the unitParty Following Applies only in the U.S.ADeclaration Conformity Trade Name PV-GS85/PV-GSS0Important Safety Instructions Not in USE Battery pack Lithium ion battery packUSE & Location ODO not Leave the Camcorder withAC adaptor Contents Menu Playback ModeEdit Mode WithPush the Push mark O in order to close Quick GuideCassette holder Set to Tape Playback Mode Recording on a tape OSet to Tape Recording ModePress the Photoshot button PV-GS85 Only AccessoriesCamcorder Built-in LED video lightJ23LCD monitor open part -/7- 24 Speaker-4e 1o Battery holderViewfinder-/7-,-6s LCD monitor-/7Grip belt How to remove the Sensor tag for U.S.A. onlyRemoving the battery Power supplyConnecting to the AC outlet Charging the batteryCGA-DU12 Charging time and recordable timeTurning the Camcorder on CGR-DU06Close the LCD monitor and retract the viewfinder Setting date and timeRecharging the built-in lithium battery OFF onUsing the viewfinder Using the LCD monitorPull the LCD monitor out in the direction of the arrow Viewfinder Set to Tape/Card Recording Mode Set Setup Quick Start onTo cancel Quick Start Set Setup Quick Start OFF Quick StartInserting/remo ving a cassette When the cassette holder cannot be housedPush the Push mark O in order to close the cassette holder Insert/remove the card into/from the card slot Turn off the power OConcerning the write protection switch on the SD Card Inserting/removing a cardTape Recording Mode Selecting a mode How to use the joystickCard playback mode PV-GS85only Switching the language Help modeUsing the menu screen LCD SET Press the Light button. oThe LED video light turns off Recording with the built-in LEDPress the Light button. O Press the Light buttonAnual About auto modeCheck before recording Basic Camcorder ositioningConcerning the remaining tape time indication on the screen Recording on a tapeMinutes Power SaveRecording check Blank search functionRecording a still picture on a tape Press the Photoshot button O in the recording pause modeRecording with a shutter operation effect Set to Card Recording Mode Press the Photoshot button OSet Advanced Shtr Effect About the variable speed zoom function Set to Tape Recording Mode Set Advanced D.ZOOM 50× or 1000×Zoom in/out function Digital zoom functionMagicPix function To cancel the MagicPix functionRecording yourself Backlight compensation functionFade in/fade out function Soft skin modeTo stop the timer midway through Press the Menu button Self-timer recording PV-GS85onlyWind noise reduction function Optical image stabilizer function Wide/43 functionGuideline function To cancel the scene mode function Set Basic Scene Mode select the desired mode Sports modeSpotlight mode Surf & snow modeWhite Balance Recording in natural ColorsManual Manual shutter speed/aperture adjustment Manual focus adjustmentShutter speed range Manual iris/gain adjustmentPlaying back tape Elnsert a recorded tape or card into this Camcorder Frame-by-frame playback Playback on TVTo return to normal playback About the compatibility of still pictures Move the --/VOL+ Lever to switchPlaying back To display multiple Playback filesFormatting a card PV-GS85only Deleting files recorded on a cardProtecting files on a card To complete the settings Press the Menu buttonTo set so that all pictures are not printed Copying onto a DVD recorder or a VCR Dubbing Recording from a tape onto a cardVideoin Using the DV Interface Cable for Recording Digital Dubbing PC Connection with the DV Interface Cable RAM Connecting ComputerCamcorder CPURAM Using as a Web cameraPlease Send ReceiveDouble click the icon For U.S.A.consumersSetting up MSN Messenger Windows Live Messenger Setting up Windows MessengerOperating environment on iMovie 4/ iMovie HD Using on MacintoshVerify Matshita DVC USB Device is selected and click OK To disconnect USB cable safelyIf you no longer need the driver Select USB Mass Storage Device and click StopAbout the compatibility of the card files PV-GS85 only No tesAbout the SD Card PV-GS85 only Files recorded on a SD CardMisc Advanced Menu listTape Playback Menu Tape Recording MenuAdvanced Dpof SET -44- Format Card Basic DATE/TIME -ss-PROTECTMenus related to playback Menus related to recordingOther menus WEB Camera IndicationsBasic indications Recording indicationsConfirmatory indications Functions that cannot be used simultaneously EAdjustingthe shutter speed, iris/gainBefore requesting repair Different sounds are reproduced at the same time Remaining tape time indication disappearsPlayback picture is not clear Even if a card is formatted, it cannot be used Card PV-GS85only Recorded pictures are not clear File recorded on a card cannot be deleted Photoshot playback images do not look normalRemove the tape if it is inserted About condensationWhile carrying the Camcorder, do not drop or bump it About the CamcorderDo not throw old battery into fire Prepare spare batteries when going out for recordingPeriodical check-ups Explanation of terms Recording format SpecificationsOthers AC adaptor Coa000,Oan0o0,o,os Camcorder Accessory SystemMethod of payment check one Request for Service Notice USAOnly QuestforServiceNoticePanasonic Ncmarts@us.panasonic.com Customer Services DirectoryCamcorder Product One 1 year, parts and labour Warranty For Canadian CustomersWarranty Service If YOU Ship the Product to a ServicentreDpof IndexSP/LP Spanish Quick Use Guide Gu/a espaola para el uso rpido El boton de Photoshot O Como apagar la alimentacionPanasonic Puerto Rico, inc
Related manuals
Manual 84 pages 54.43 Kb