| Before | using | |
Quick | Guide | 3 | Push the [PUSH] mark O in order to close |
_iiiii | iiiiiiiii_iiiii | ,, | the cassette holder. |
•Charging the battery
1Connect the AC Cable to the AC adaptor and the AC Jack,
2 Put the battery on the battery mount by aligning the mark, and then securely plug it in.
4 Only after the cassette holder is completely housed, close the cassette cover.
• Inserting/removing a card 1 Open the card slot cover.
• Attaching the battery | Insert/remove the card into/from the card | |
Push the battery against the battery holder and | ||
slot. | ||
slide it until it clicks. | ||
|
• Inserting/removing a cassette
1 Slide the [OPEN/EJECT] lever and open the cassette cover.
OPE_
2 After the cassette holder is opened, insert/ remove the cassette.
O
oWhen inserting a card, face the label side O towards you and push it straight in with one stroke as far as it goes.
oWhen removing the card, open the card slot cover and press the center of the card and then pull it straight out.
3 Securely close the card slot cover.
•How to turn on the power
1While pressing the button O, set the [OFF/ON] switch to [ON].
9
LSQT1121