| Record | mode |
|
• Playback | of the image on other digital video | • | display in the tape |
equipment | recorded in the LP mode. | recording | mode |
•
Recording on a tape
IIIIIIIIIIIIIIII_III_I_IIIIIIIIIIIIIIIIII_III_WIIIIIIIIIIIIIIIIIIII_IIIIIII_IIIIIIIIIIIIIIIIIIIIIII_II_IIIIIIIIII_IIII__
Remove the lens cap.
(When the Camcorder is turned on with the lens cap fitted, the automatic white balance adjustment may not function properly. Please turn the Camcorder on after removing the lens cap.)
When this unit is purchased, the aspect ratio is set to [16:9] for recording images compatible with a
•Set to Tape Recording Mode.
w _
1 Press the recording start/stop button to start recording.
2 Press the recording start/stop button again to pause recording.
•For the recording time on a tape, refer to
•Carry out a recording check
•In order to find the unrecorded section, carry out the blank search
)
6)
1)Recording time elapse
2)Remaining tape indication
3)Still picture size
4)Card indication
5)Number of recordable still pictures (When no picture can be recorded, this indication will flash in red.)
6)Quality of still pictures
• Concerning the remaining tape time indication on the screen
•The remaining tape time is indicated in minutes. (When it reaches less than 3 minutes, the indication starts flashing.)
•During a
•In some cases, the remaining tape time indication may display remaining tape time that is 2 to 3 minutes shorter than the actual remaining tape time.
27
LSQT1121