
Interface bracket mountings
Mounting the bracket on a tripod
1 Mount the interface bracket on the tripod. (Screw: 1/4 – 20UNC)
Mounting the camera
2 Mount the camera (in which the SDI card has been installed) on the interface bracket.
Fasten the fixing knob to firmly secure the camera.
Mounting the viewfinder on a bracket
3 Mount the mounting base that is supplied to the viewfinder onto the top of the interface bracket using the 2 screws provided.
(Mount the base securely so that it is not unsteady.)
Mounting base
2 screws
4 Slide the viewfinder onto the mounting base and tighten the fixing knob to secure it firmly.
5 Connect the viewfinder cable to the EVF connector 1 or 2 on the interface bracket.
6 Connect the EVF I/F cable from the interface bracket to the EVF I/F connector on the SDI card.
ENGLISH
Fixing knob
Fixing knob
Fixing knob
- (E) -