Panasonic AW-PB506AL manual Installing the SDI card, Before installing the SDI card

Page 8

Align the SDI card with the guides and insert it.

Ensure the card is fully inserted.

Installing the SDI card

Always ask your local dealer to install the SDI card.

Before installing the SDI card:

Release the static carried in the body of the person to perform the installation. Installation can be performed more safely if an anti-static wrist strap is worn. Touching the card without first releasing this static may cause malfunctioning.

Do not allow the metal part of the card come in contact with any other metal parts.

Rear panel

Optional card slot cover

SDI card

2 screws (6 mm)

4 screws (8 mm)

1 Turn the power to the camera off and remove any cables which are connected to the power connector or other connectors.

2 Loosen the 4 screws (8 mm) on the rear panel of the camera, then remove the panel itself.

3 Loosen the 2 screws (6 mm) on the optional card slot cover, then remove the cover.

4

5 Firmly tighten the 2 screws (6 mm) to the optional card slot.

6 Firmly secure the rear panel with the

4 screws (8 mm).

Note

If the screws are misplaced, use the extra screws supplied with this product.

- (E) -

Image 8

Contents AW-PB506AL Studio SDI CardSafety precautions  do not Remove Panel Covers by UnscrewingFor business users in the European Union Mixed with general household wasteAccessories ContentsConfiguration Introduction CharacteristicsPrecautions for use EDH ENABLE/DISABLE Factory setting Enable Model selection E350/E860 Factory setting E350Data Clip NORMAL/CLIP Factory setting Normal NTSC/PAL switching NTSC/PAL Factory setting NtscMajor operating controls and their functions Interface bracketBefore installing the SDI card Installing the SDI cardAlways ask your local dealer to install the SDI card Interface bracket mountings Mounting the bracket on a tripodMounting the camera Mounting the viewfinder on a bracketWhen configuring a system with the remote control unit ConnectionsVideo monitor SDI monitor When configuring a system with the remote operation panelRemote operation panel When performing the settings with the convertible camera Setting and changing of menu itemsPerforming the settings When performing the settings with When performing the settings with Convertible cameraOptional card settings submenu Zebra indicator ON, OFFAppearance Unit mm15 E Specifications