Setting and changing of menu items
Optional card settings submenu
1
2
3
4
1Zebra indicator (ON, OFF)
This sets the zebra pattern display which appears in the viewfinder.
ON: Zebra patterns are displayed in the viewfinder.
OFF: Zebra patterns are not displayed in the viewfinder.
<Note>
Even if “ON” is selected for this setting, the zebra patterns will not be displayed in the viewfinder if “CVBS” has been selected as the EVF output 4 setting.
3Safety zone (1 to 4, OFF)
This selects the type of safety zone that is displayed in the viewfinder.
If “OFF” is selected, a safety zone will not be displayed.
<Note>
The safety zone and the center marker reflect the electrical positions which may differ from the optical positions.
The inner frame and the outer frame are approximately 90% and 95%, respectively, of the safety zone.
2Level (70% to 110%)
The zebra patterns are displayed to use as a yardstick for the brightness level.
<Note>
These settings are available when “ON” has been selected for the Zebra indicator 1 setting.
4EVF output (Y, CVBS)
This sets the signals to be output to the viewfinder.
Y:Brightness signals are output to the viewfinder.
CVBS: Color signals are output to the viewfinder.
<Note>
The zebra pattern is not displayed in the viewfinder when “CVBS” has been selected.
- 13 (E) -