Panasonic AW-RP50N Linking the unit with the switcher, Switcher network settings, Ipsw

Page 28
1.IP:SW
192 168.000.020
Turn the F2 dial, and then press it.
[7]SW IP ADR
Press the F1 dial.
1.IP:SW
192 168.000.020
[1]CAMERA CTL ▼

Linking the unit with the switcher

This setting is used to link the unit with an optional switcher (AW-HS50).

￿￿Switcher network settings

1Set the MENU button to ON.

Press the MENU button to light its indicator.

2Set PRESET MEMORY/MENU 10 button (SYSTEM) to ON.

When the button is pressed and its indicator is lighted, the [SYSTEM] menu is displayed on the LCD panel.

3Turn the F1 dial, display the SW IP ADR menu, and press the F1 dial.

4Turn the F2 dial, select the IP address, and then press the F2 dial to enter the selection.

Set the IP address which has been set in the switcher.

1.IP:SW

172.168 000.020

Input the IP address in four blocks of numerals. When input advances to the last block and the F2 dial is pressed, the IP address is entered.

1.IP:SW

172.168.000.030

28

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Operating Instructions Contents Before use How to turn the power of the remote cameras on and off How to turn the power of the remote cameras onSetting and operating the preset memories Registering data in the preset memoriesHold down the Preset MEMORY/MENU button of the number on Preset numbers and registered pagesDeleting the preset memory data Executing the preset dataHold down the Preset MEMORY/MENU button for the number on Setting the gain Selecting the settings for a selected remote cameraSetting the pedestal Setting the R and B gain values Setting the R and B pedestalSet the Preset MEMORY/MENU 2 button R/B Gain to on Set the Preset MEMORY/MENU 3 button R/B PED to onSetting the white balance Set the Preset MEMORY/MENU 4 button AWB/ABB to onTurn the F1 dial to select the white balance mode Selecting the white balance modeAWB Mode AWB a SET Automatically adjusting the white balanceTurn the F2 dial to select AWB, and press the F2 dial Manually adjusting the white balance Automatic color temperature tracking ATWAWB Mode ATW SET Turn the F1 dial to select ATWSetting the black balance Automatically adjusting the black balanceAWB Mode AWB B SET ABB Manually adjusting the black balanceSetting the shutter speed Setting the detailSet the Preset MEMORY/MENU 5 button Shutter to on Turn the F1 dial to select the shutter modeSetting the shooting mode Set the Preset MEMORY/MENU 7 button SCENE/MODE to onTurn the F1 dial to select the shooting mode Specifying the color barsOperating the menu items of the selected remote camera Table of operationsSetting the User buttons Set the Preset MEMORY/MENU 9 button Setup to onRegistering functions User buttons SwlinkSetting the functions Turn the F1 dial to select the target menu itemSetting the remote camera operations Setting the pan, tilt, zoom and focus operation directionsZoom DIR Normal Focus DIR NormalSelecting the control items pan, tilt, zoom and focus Speed with Z OffSpeed Target Z/FSwitching from focus control to iris control or vice versa Setting the PAN/TILT lever inclination and speedFOCUS/IRIS Normal T CurvScope Mode a Diag SpeedSetting the upper limit Setting the lower limitSetting the left limit Setting the right limitReturning the remote cameras to their home position Home Position SET6FUNCTION Adjusting the minimum pan/tilt start speed Adjusting the minimum lens zoom start speedT MIN Speed Start MIN Speed8GPI Setting the preset numbers 10MENU CTL Setting button operation enable or disableMenu Control Enable Locking the button operationsLinking the unit with the switcher Switcher network settingsSet Preset MEMORY/MENU 10 button System to on IpswSetting the image output and image input Turn the F1 dial to select the input line of the switcher1CAMERA CTL 3SW AssignSwitcher settings Set Preset MEMORY/MENU 9 button Setup to onTurn the F1 dial to select the menu item to be set 2SW LinkFasist Off BUS AUXCamsel Off T Lever Tallyip OffSelf Setting for the information to be displayed on the OSD Setting all the information displays togetherTurn the F1 dial to and select the menu item to be set 3SW DispSetting each information item to be displayed Checking the equipment alarm information 8ALARMPower No Alarm Turn the F2 dial to display the remote camera itemPress the F2 dial to initialize the settings Turn the F2 dial to select the initializing modeReturning the unit to its factory status Control interface for external devices Sub 15-pin, female, inch threadExample of GPIOut connections Current Max mA AW-RP50RP setting tool Installing the softwareIP settings Software provided on the CD-ROMAuto IP setting Changing the IP addressesChanging the camera numbers Click RenewAlarm displays Displaying the camera namesInitializing the IP addresses Acquiring informationSaving the setting files Saving and loading dataSystem section, click Save under From AW-RP50 Input the filename, and click SaveLoading the setting files Saving the log filesTable of menu items Pedestal AW-HE50Video Setup Setup PTZ ADJ MIN Speed Start Limit UP AW-HE50 F0410Y0 Operating Instructions Basics Safety precautions FCC NoteImportant Safety Instructions Before use Overview Before use Characteristics Pan-tilt heads and cameras supported AccessoriesPan-tilt heads supported Required personal computer environment CPUInstallation precautions Connecting the power supplyChoosing the best installation location Handle carefullyOperating precautions Power indicator Power F1 dial, F2 dial Alarm indicator AlarmParts and their functions Control panelPreset MEMORY/MENU buttons Camera OSD button Camera OSDExit button Exit User buttons USER1, USER2Auto focus button Auto FOCUS/PUSH OAF dial FOCUS/PUSH OAFIris dial Iris Auto iris button AutoPower switch Power DC in socket DC 12 Ground terminal Signal GNDService switch SV/NM LAN connector LAN RJ-45 10BaseT/100BaseTXBasic operations of the unit Basic operations for the menus Change the settings using the F1 dial and F2 dialSelect the target menu Network settings Setting the unit000 MAC AddressExample of IP connections ConnectionsConnections with the AW-HE50 and AW-HS50 Connection with the AW-HE50 Example of serial connectionsConnection with the AW-HE100 Connections with the AW-PH400 and camera Max m 3280 ftConnections with the AW-PH405 and camera Connection with the AW-PH650 Serial connection Settings for connection with the remote camerasIP connection Setting the IP addresses automatically auto IP setting When setting the IP addresses for the first timeAuto Setup Renew YESTurn the F2 dial, select Yes, and then press the F2 dial Auto Setup Keep IP Duplicate ERR Setting the IP addresses Changing the IP addresses of the remote camerasSelecting the camera group Group SelectChanging the IP address of the switcher Auto Setup ALL ClearChanging the camera numbers Clearing the IP address control tablesIndicator lighting statuses and remote camera statuses Set the Preset MEMORY/MENU 8 Button Camera to onSelecting the remote cameras to be operated Power plug from the power outlet, and allow the unit MaintenanceTo cool down Appearance Unit mm inchInput/Output connector SpecificationsAC adapter F0410Y0
Related manuals
Manual 48 pages 18.08 Kb

AW-RP50N specifications

The Panasonic AW-RP50N is a sophisticated remote camera controller designed for professional video production environments. Renowned for its advanced features and versatility, the AW-RP50N serves as an essential tool for operators needing precise control over multiple cameras in real-time.

One of the standout characteristics of the AW-RP50N is its ability to control up to 200 Panasonic cameras simultaneously. This feature is particularly beneficial in large-scale productions, such as broadcasting events, live concerts, and sports. It not only enhances operational efficiency but also provides cinematographers with a centralized point for camera management.

The AW-RP50N boasts a user-friendly interface, equipped with a large LCD touch panel that allows easy navigation and adjustment of camera settings. The intuitive layout makes it simple for operators to switch between camera feeds, adjust PTZ (pan-tilt-zoom) settings, and monitor video feeds without interruption. Customizable settings enable users to tailor the interface to suit their workflow preferences.

In terms of technology, the AW-RP50N supports multiple communication protocols, including IP (Internet Protocol) and serial communication. This flexibility allows integration with various camera models and third-party systems, offering a cohesive control experience. The unit is designed with robustness in mind, ensuring reliability even in demanding environments.

The AW-RP50N features advanced zoom and focus controls, providing smooth and precise movements essential for capturing high-quality video content. With programmable presets, operators can save specific camera angles and settings, making it easy to quickly switch back to preferred positions during production.

Additionally, it supports HD/SD video formats, catering to diverse production needs. The unit's compact design also makes it an ideal choice for mobile setups and small production teams that require portability without sacrificing performance.

Overall, the Panasonic AW-RP50N remote camera controller is a remarkable piece of technology, combining scalability, ease of use, and high-performance capabilities. Its robust feature set makes it an indispensable asset for professionals in the broadcasting and production industry, ensuring dynamic and reliable control of remote cameras in any situation. Whether scaling a large production or managing a small shoot, the AW-RP50N enables creators to achieve their artistic vision with precision and ease.
Top Page Image Contents