Axis Communications Q6042 PTZ LED Indicators, Multi-connector, SD Card Slot, Control Button

Page 7

AXIS Q6042 PTZ Dome Network Camera

Hardware Overview

NOTICE

Due to local regulations or the environmental and electrical conditions in which the product is to be used, a shielded network cable (STP) may be appropriate or required. All cables connecting the product to the network and that are routed outdoors or in demanding electrical environments shall be intended for their specific use. Make sure that the network devices

are installed in accordance with the manufacturer’s instructions. For information about regulatory requirements, see Electromagnetic Compatibility (EMC) on page 2 .

Multi-connector

Terminal connector for connecting external equipment:

Audio equipment

Input/Output (I/O) devices

AC/DC power supply

When connecting external equipment, a multi-connector cable (available from Axis) is required in order to maintain the product’s NEMA/IP rating. For more information, see Multi-Connector Cable (sold separately) on page 58.

SD Card Slot

An SD card (not included) can be used for local recording with removable storage. For more information, see Technical Specifications .

NOTICE

To prevent corruption of recordings, the SD card should be unmounted before removal. To unmount, go to Setup > System Options > Storage > SD Card and click Unmount.

Note

For SD card recommendations see www.axis.com

Control Button

The control button is used for:

Resetting the product to factory default settings. See page 56.

Connecting to an AXIS Video Hosting System service. See page 49. To connect, press and hold the button for about 3 seconds until the Status LED flashes green.

Connecting to AXIS Internet Dynamic DNS Service. See page 49. To connect, press and hold the button for about 3 seconds.

Power Button

Press and hold the power button to temporarily power the product when the dome cover is removed. The power button is also used with the control button to reset the camera to factory default settings. See page 56.

LED Indicators

LED

Color

Indication

 

 

 

Status

Unlit

Connection and normal operation

 

 

 

 

Amber

Steady during startup. Flashes during firmware upgrade.

 

 

 

 

Amber/red

Flashes amber/red if network connection is unavailable or lost.

 

 

 

 

Red

Flashes red for firmware upgrade failure.

 

 

 

 

Green

Shows steady green for 10 seconds for normal operation after restart.

 

 

 

7

Image 7
Contents Axis Q6042 PTZ Dome Network Camera Intellectual Property Rights About this DocumentLegal Considerations LiabilityLearn More SupportAxis Q6042 PTZ Dome Network Camera Table of ContentsConnectors Performance Considerations Reset to Factory Default SettingsHardware Overview Connectors and ButtonsNetwork Connector For technical specifications, seeSD Card Slot LED IndicatorsMulti-connector Power ButtonGreen Steady when AC power input connected Midspan LED IndicatorsSet the Root Password Access the ProductAccess from a Browser Access from the InternetControls on the Live View Live ViewClick Use Https To show the manual trigger buttons in the Live View Go to Setup EventsAxis Media Control viewer toolbar Manual TriggerSpeaker button Click to turn the speakers on or off PTZ ControlsAxis Q6042 PTZ Dome Network Camera Media Streams How to Stream H.264Axis Media Control AMC QuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamJava applet supports simplex audio with G.711 encoding Access Audio StreamsBasic Setup Set Up the ProductImage Video and AudioVideo Stream Pixel Counter264 Stream ProfilesWhite Balance Camera SettingsExposure Settings Image AppearanceGo to Video & Audio Video Stream and select the Image tab Image SettingsOverlay Overlay ImageGo to Video & Audio Overlay Image Use Overlay Text in an Action RuleGo to Events Action Rules Privacy Mask Audio SettingsAudio Modes Audio Input Audio ClipsAudio Output Axis Q6042 PTZ Dome Network Camera Browser Viewer Description Configure the Live ViewDefault Viewer for Browsers Viewer SettingsUser Defined Links Go to Setup Live View ConfigOutput Buttons Gatekeeper Preset PositionsGo to PTZ Preset Positions PTZ Pan Tilt ZoomMax Limits ConfigurationAutotracking Exclude AreasTo add a recorded tour Guard TourTour Recording To add a guard tourControls Osdi ZonesAdvanced LimitsControl Queue Operator Same as administrator but with lower priorityMotion Detection Set Up Motion Detection WindowsDetectors Shock DetectionAudio Detection Application Licenses Install ApplicationGo to Setup Applications ApplicationsAxis Q6042 PTZ Dome Network Camera Go to Events Action Rules and click Add Set Up Action RulesEvents Convert Event Types to Action RulesTriggers Actions Add RecipientsRecipient Types Recipient Use with action Set Up Email RecipientsGo to Events Schedules and click Add Set Up RecurrencesCreate Schedules To create a new scheduleGo to Recordings List RecordingsRecording List Continuous RecordingClick Save to save and start the recording Languages IP Address Filter System OptionsSecurity UsersCertificates IeeeGo to System Options Security Ieee Date & Time To install a self-signed certificateGo to Setup System Options Security Certificates Click Install certificate and upload the certificateNetwork Basic TCP/IP SettingsDNS Configuration Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service Axis Internet Dynamic DNS Service requires IPv4NAT traversal port mapping for IPv4 NTP ConfigurationHost Name Configuration Link-Local IPv4 AddressFTP QoS Quality of ServiceRTP/H.264 UPnPTM can be disabled under System Options Network UPnPTMSmtp email UPnPTMMount and Unmount SD Card StorageBonjour SD CardPort Status Ports & DevicesNetwork Share PortsSystem Overview MaintenanceSupport Support OverviewFile Upload Reset to Factory Default SettingsPlain Config ScriptingAxis Q6042 PTZ Dome Network Camera To max 40 V DC, open drain, 100 mA Multi-Connector Cable sold separatelyCable provides the following connectors Function Pin SpecificationsConnector Check the Firmware TroubleshootingUpgrade the Firmware Emergency Recovery ProcedureProduct is accessible locally but not externally Symptoms, Possible Causes and Remedial ActionsProblems setting the IP address Product cannot be accessed from a browserKey frames Problems with streaming H.264Video and image problems, general Setup Video & Audio Camera SettingsPoor audio quality SettingsStorage and disk management problems No audioTechnical Specifications Power Function/group Specifications Network SecurityInstallation aid MaintenancePerformance Considerations ConnectorsAxis Q6042 PTZ Dome Network Camera M4.2
Related manuals
Manual 68 pages 44.1 Kb

Q6042 PTZ specifications

The Axis Communications Q6042 PTZ is a sophisticated network camera designed for demanding surveillance environments. Known for its high-resolution imaging and advanced features, this camera is an ideal choice for monitoring large areas such as city centers, airports, and parking lots.

One of the standout features of the Q6042 is its 1080p resolution, offering crisp, detailed video quality. The camera supports H.264 compression technology, which minimizes bandwidth use and storage requirements without sacrificing image quality. This makes it very efficient for users looking to maintain high video fidelity while maximizing their network and storage capacity.

Another key characteristic of the Q6042 is its 18x optical zoom, enabling operators to zoom in on distant subjects without blurring the image. Combined with its advanced pan and tilt capabilities—offering a 360-degree continuous rotation and a tilt range of -20 to +90 degrees—the PTZ camera can cover vast areas and track moving objects with ease. This functionality is particularly useful for security personnel who need to monitor dynamic environments.

The Q6042 is also equipped with Axis' Wide Dynamic Range (WDR) technology, which enhances the camera's ability to capture clear images in challenging lighting conditions. This feature is vital when monitoring areas that experience significant contrasts in light, such as entrances and exits.

The camera is built for durability and features an IP66-rated weatherproof housing, protecting it from dust and heavy rain. It is also resistant to vandalism, making it suitable for outdoor installations where security is a prime concern.

Integrated with Axis’ Corridor Format technology, the Q6042 can be configured to monitor tall and narrow areas, optimizing the field of view for situations like hallways or alleys. This maximizes the effectiveness of surveillance and reduces the amount of unnecessary data captured.

Moreover, the Q6042 supports various network protocols and can be seamlessly integrated with other security systems. With its built-in analytics capabilities, the camera can be equipped with features such as motion detection and audio detection, allowing users to receive alerts based on specific events.

In summary, the Axis Communications Q6042 PTZ camera offers a robust solution for high-security surveillance needs, equipped with high-resolution video, extensive zoom capabilities, and advanced analytics, making it a versatile tool for modern security applications.