Axis Communications ptz dome network camera user manual Link-Local IPv4 Address

Page 41

AXIS P5532 PTZ Dome Network Camera

System Options

Link-Local IPv4 Address

Link-Local Address is enabled by default and assigns the Axis product an additional IP address which can be used to access the product from other hosts on the same segment on the local network. The product can have a Link-Local IP and a static or DHCP-supplied IP address at the same time.

This function can be disabled under System Options > Network > TCP/IP > Advanced.

HTTP

The HTTP port used by the Axis product can be changed under System Options > Network > TCP/IP > Advanced. In addition to the default setting, which is 80, any port in the range 1024–65535 can be used.

HTTPS

The HTTPS port used by the Axis product can be changed under System Options > Network > TCP/IP > Advanced. In addition to the default setting, which is 443, any port in the range 1024–65535 can be used.

To enable HTTPS, go to System Options > Security > HTTPS. For more information, see page 37.

NAT traversal (port mapping) for IPv4

A network router allows devices on a private network (LAN) to share a single connection to the Internet. This is done by forwarding network traffic from the private network to the “outside”, that is, the Internet. Security on the private network (LAN) is increased since most routers are pre-configured to stop attempts to access the private network (LAN) from the public network (Internet).

Use NAT traversal when the Axis product is located on an intranet (LAN) and you wish to make it available from the other (WAN) side of a NAT router. With NAT traversal properly configured, all HTTP traffic to an external HTTP port in the NAT router is forwarded to the product.

NAT traversal is configured under System Options > Network > TCP/IP > Advanced.

Note

•For NAT traversal to work, this must be supported by the router. The router must also support UPnPTM.

•The router has many different names: “NAT router”, “Network router”, “Internet Gateway”, ”Broadband router”, “Broadband sharing device” or “Home firewall” but the essential purpose of the device is the same.

Enable/Disable - When enabled, the Axis product attempts to configure port mapping in a NAT router on your network, using UPnPTM. Note that UPnPTM must be enabled in the product (see System Options > Network > UPnP).

Use manually selected NAT router - Select this option to manually select a NAT router and enter the IP address for the router in the field. If no router is specified, the product automatically searches for NAT routers on your network. If more than one router is found, the default router is selected.

Alternative HTTP port - Select this option to manually define an external HTTP port. Enter the port number in the field. If no port is entered here, a port number is automatically selected when NAT traversal is enabled.

Note

•An alternative HTTP port can be used or be active even if NAT traversal is disabled. This is useful if your NAT router does not support UPnP and you need to manually configure port forwarding in the NAT router.

•If you attempt to manually enter a port that is already in use, another available port is automatically selected.

•When the port is selected automatically it is displayed in this field. To change this, enter a new port number and click Save.

FTP

The FTP server running in the Axis product enables upload of new firmware, user applications, etc. The FTP server can be disabled under System Options > Network > TCP/IP > Advanced.

41

Page 40 Page 42
Image 41
Page 40 Page 42
Contents Axis P5532 PTZ Dome Network Camera Liability About this documentIntellectual Property Rights Equipment ModificationsAxis P5532 PTZ Dome Network Camera Table of ContentsPerformance considerations Symptoms, possible causes and remedial actionsHardware overview ConnectorsHardware overview Color Indication LED indicatorsMidspan LED indicators Accessing the product Accessing the productAccess from a browser Start a browser Internet Explorer, Firefox, SafariSet the root password Access from the InternetNetwork TCP/IP Advanced Click Create self-signed certificateControls on the Live View Live ViewAMC Audio controls Axis Media Control viewer toolbarPTZ Controls Axis P5532 PTZ Dome Network Camera Media streams How to stream H.264Media streams Axis Media Control AMCQuickTimeTM. The following paths can be used Alternative methods of accessing the video streamJava applet supports simplex audio with G.711 encoding Accessing audio streamsBasic Setup Setting up the productSetting up the product Video and Audio Video and AudioVideo Stream Pixel CounterStream Profiles Camera SettingsImage 264Image settings Exposure SettingsImage Appearance White balanceOverlay Audio SettingsPrivacy Mask Overlay imageG711 G726 Audio InputAudio Output Audio ClipsLive View Config Default viewer for browsersLive View Config User Defined Links Viewer SettingsOutput Buttons Browser Viewer DescriptionAxis P5532 PTZ Dome Network Camera PTZ Pan Tilt Zoom Preset PositionsPTZ Pan Tilt Zoom GatekeeperOsdi Zones Guard TourAdvanced LimitsControls Operator Same as administrator but with lower priorityControl Queue Detectors Set up motion detectionDetectors Motion DetectionAudio detection Applications ApplicationsEvents EventsConvert Event Types to Action Rules Setting Up an Action RulePTZ Control Go to Events Action Rules and click AddSchedules RecipientsRecipient Use with action Go to Events Recipients and click AddGo to Events Recurrences and click Add RecurrencesRecordings RecordingsRecording List Continuous recordingAxis P5532 PTZ Dome Network Camera System Options System OptionsSecurity UsersAudio Support Date & TimeIeee Network Basic TCP/IP SettingsIPv4 Address Configuration IPv6 Address ConfigurationAdvanced TCP/IP Settings NAT traversal port mapping for IPv4 Link-Local IPv4 AddressSmtp email QoS Quality of ServiceUPnPTM StorageRTP/H.264 BonjourPorts & Devices MaintenanceNetwork Share PortsSupport Overview SupportSystem Overview Logs & ReportsScripting Reset to factory default settingsFile Upload Plain ConfigFunction Pin Specifications Multi-Connector Cable sold separatelyMulti-Connector Cable sold separately Connector DC power input Connection diagramTroubleshooting TroubleshootingEmergency recovery procedure Checking the firmwareProduct cannot be accessed from a browser Symptoms, possible causes and remedial actionsProblems setting the IP address Problems with the H.264 format Product is accessible locally but not externallySetup Video & Audio Camera Settings Video and image problems, generalProblems uploading files No images displayed on webStorage and disk management problems SettingsNo audio Poor audio qualityTechnical Specifications Technical SpecificationsMemory Power Maintenance Installation aidsConnectors Function/group Specifications Network SecurityPerformance considerations Ver M1.10 Axis P5532 PTZ Dome Network Camera
Top Page Image Contents