AXIS P5532 PTZ Dome Network Camera
Hardware overview
Hardware overview
4 5 6 7
1 3
2
1Part number (P/N) & Serial number (S/N)
2Network connector (High PoE)
3
4Control button
5SD memory card slot
6Status LED indicator
7Restart button
Connectors
Network connector -
Caution
Due to local regulations or the environmental and electrical conditions in which the product is to be used, a shielded network cable (STP) may be appropriate or required. Any network cables that are routed in outdoor environments or similar shall be shielded (STP) and intended for their specific use. Make sure that the midspan is properly grounded. See Electromagnetic Compatibility (EMC) for regulatory requirements.
SD card slot - A standard or
Note
Before removal, the SD card should be unmounted to prevent corruption of recordings. To unmount the SD card, go to Setup > System Options > Storage > SD Card and click Unmount.
Control button - The control button is used for:
•Connecting to an AXIS Video Hosting System service. See page 40. To connect, press and hold the button for about 1 second until the Status LED flashes green.
5