
AXIS P5532 PTZ Dome Network Camera
Hardware overview
•Connecting to AXIS Internet Dynamic DNS Service. See page 40. To connect, press and hold the button for about 3 seconds.
•Resetting the product to factory default settings. See page 46.
Restart button - Press to restart the product.
•Audio equipment
•Input/Output (I/O) devices
•AC/DC power supply
When connecting external equipment, a 
LED indicators
| Color | Indication | 
| 
 | 
 | 
| Unlit | Connection and normal operation | 
| 
 | 
 | 
| Amber | Steady during startup. Flashes during firmware upgrade. | 
| 
 | 
 | 
| Amber/red | Flashes amber/red if network connection is unavailable or lost. | 
| 
 | 
 | 
| Red | Flashes red for firmware upgrade failure. | 
| 
 | 
 | 
| Green | Shows steady green for 10 seconds for normal operation after restart. | 
| 
 | 
 | 
Note
• The Status LED can be configured to flash while an event is active.
Midspan LED indicators
| LED | Color | Indication | 
| 
 | 
 | 
 | 
| Port | Unlit | No camera connected. | 
| 
 | Green | Steady when camera connected, normal operation. | 
| 
 | Green, flashing | Slow flash when over current or short circuit condition on the port. | 
| 
 | Green, flashing | Fast flash when input voltage is out of range or other internal error. | 
| 
 | 
 | 
 | 
| AC input | Green | Steady when AC power connected. | 
| 
 | 
 | 
 | 
6