Axis Communications P5415E Date & Time, Audio Support, To install a self-signed certificate

Page 46

AXIS P5415–E PTZ Dome Network Camera

System Options

To install a self-signed certificate:

1.Go to Setup > System Options > Security > Certificates .

2.Click Create self-signed certificate and provide the requested information. To create and install a CA-signed certificate:

1.Create a self-signed certificate as described above.

2.Go to Setup > System Options > Security > Certificates .

3.Click Create certificate signing request and provide the requested information.

4.Copy the PEM-formatted request and send to the CA of your choice.

5.When the signed certificate is returned, click Install certificate and upload the certificate.

Server/Client certificates can be installed as Certificate from signing request or as Certificate and private key. Select Certificate and private key if the private key is to be upload as a separate file or if the certificate is in PKCS#12 format.

The Axis product is shipped with several preinstalled CA certificates . If required, additional CA certificates can be installed:

1.Go to Setup > System Options > Security > Certificates .

2.Click Install certificate and upload the certificate.

Audio Support

Select Enable audio support to allow clients to retrieve audio streams from the Axis product. For information on how to configure audio settings, see Audio Settings on page 23.

Note

Deselecting this option will disable audio globally in the Axis product, for configured events and profiles with audio as well.

Date & Time

The Axis product’s date and time settings are configured under System Options > Date & Time.

Current Server Time displays the current date and time (24h clock). The time can be displayed in 12h clock in the text overlay (see below).

To change the date and time settings, select the preferred Time mode under New Server Time:

Synchronize with computer time – Sets date and time according to the computer’s clock. With this option, date and time are set once and will not be updated automatically.

Synchronize with NTP Server – Obtains date and time from an NTP server. With this option, date and time settings are updated continuously. For information on NTP settings, see NTP Configuration on page 49.

If using a host name for the NTP server, a DNS server must be configured. See DNS Configuration on page 48.

Set manually – Allows you to manually set date and time.

If using an NTP server, select your Time zone from the drop-down list. If required, check Automatically adjust for daylight saving time changes.

The Date & Time Format Used in Images is the date and time format displayed as a text overlay in the video stream. Use the

predefined formats or see File Naming & Date/Time Formats in the online help for information on how to create custom date and time formats. To include date and time in the overlay text, go to Video & Audio and select Include date and Include time.

46

Image 46
Contents Axis P5415-E PTZ Dome Network Camera Liability About this DocumentLegal Considerations Intellectual Property RightsSupport Learn MoreTable of Contents Axis P5415-E PTZ Dome Network CameraConnectors Performance Considerations For technical specifications, see Connectors and ButtonsNetwork Connector RJ45 Ethernet connector with Power over Ethernet Plus PoE+LED Indicators Access from a Browser Access the ProductStart a browser Internet Explorer, Firefox, Safari Set the Root Password Access from the InternetClick Use Https Controls on the Live View Go to Setup EventsLive View Manual TriggerTo show the manual trigger buttons in the Live View Axis Media Control viewer toolbarPTZ Controls AMC Audio ControlsAxis P5415-E PTZ Dome Network Camera Media Streams How to Stream H.264Axis Media Control AMC Alternative Methods of Accessing the Video Stream QuickTimeTM. The following paths can be usedAccess Audio Streams Java applet supports simplex audio with G.711 encodingSet Up the Product Basic SetupVideo Stream Video and AudioImage Click Save to apply the new settings 264Camera Settings Stream ProfilesSet Shutter to OverlayShutter & Gain Day/NightGo to Video & Audio Video Stream and select the Image tab Overlay ImageGo to Video & Audio Overlay Image Use Overlay Text in an Action Rule Privacy MaskGo to Events Action Rules Audio Modes Audio SettingsAudio Input Audio Clips Audio OutputConfigure the Live View Default Viewer for BrowsersUser Defined Links Viewer SettingsGo to Setup Live View Config Output ButtonsAxis P5415-E PTZ Dome Network Camera Gatekeeper Preset PositionsPTZ Pan Tilt Zoom Guard TourLimits Osdi ZonesAdvanced Formats in the online helpControl Queue ControlsOperator Same as administrator but with lower priority Motion Detection Set Up Motion Detection WindowsDetectors Go to Detectors Motion DetectionAudio Detection Motion Detection ParametersApplications Install ApplicationGo to Setup Applications Application LicensesAxis P5415-E PTZ Dome Network Camera Convert Event Types to Action Rules Set Up Action RulesEvents Go to Events Action Rules and click AddTriggers Actions Add RecipientsRecipient Types Set Up Email Recipients Recipient Use with actionTo create a new schedule Set Up RecurrencesCreate Schedules Go to Events Schedules and click AddContinuous Recording RecordingsRecording List Go to Recordings ListClick Save to save and start the recording Languages Users System OptionsSecurity IP Address FilterCertificates IeeeGo to System Options Security Ieee Click Install certificate and upload the certificate To install a self-signed certificateGo to Setup System Options Security Certificates Date & TimeBasic TCP/IP Settings NetworkAxis Internet Dynamic DNS Service requires IPv4 Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service DNS ConfigurationLink-Local IPv4 Address NTP ConfigurationHost Name Configuration NAT traversal port mapping for IPv4QoS Quality of Service FTPUPnPTM UPnPTM can be disabled under System Options Network UPnPTMSmtp email RTP/H.264SD Card StorageBonjour Mount and Unmount SD CardPorts Ports & DevicesNetwork Share Port StatusSupport Overview MaintenanceSupport System OverviewScripting Reset to Factory Default SettingsPlain Config File UploadAxis P5415-E PTZ Dome Network Camera Repainting the Camera Firmware To upgrade the product’s firmware TroubleshootingUpgrade the Firmware Check the FirmwareProblems setting the IP address Symptoms, Possible Causes and Remedial ActionsEmergency Recovery Procedure Product cannot be accessed from a browserProblems with streaming H.264 Product is accessible locally but not externallyBasic Settings Video and image problems, generalSetup Video & Audio Camera Settings Storage and disk management problemsVideo cannot be recorded Technical Specifications Maintenance General Casing Function/group Specifications Network SecurityInstallation PowerConnectors Terminal ConnectorFunction Pin Audio Input Performance ConsiderationsTip Microphone/LineM4.2