Axis Communications P3301 user manual Set Up the Product, Basic Setup, Focus Adjustment

Page 15

AXIS P3301 Fixed Dome Network Camera

Set Up the Product

The Axis product can be configured by users with administrator or operator rights. To open the product’s Setup pages, click Setup in the top right-hand corner of the Live View page.

•Administrators have unrestricted access to all settings.

•Operators have access to all settings except System Options

Basic Setup

Basic Setup provides shortcuts to the settings that should be made before using the Axis product:

1.Users. See page 34.

2.TCP/IP. See page 36.

3.Date & Time. See page 35.

4.Video Stream. See page 16.

5.Focus. See page 15

6.Audio Settings. See page 20.

The Basic Setup menu can be disabled from System Options > Security > Users.

Focus Adjustment

The focus can be adjusted under Basic Setup > Focus. Follow the on-screen instructions to adjust the focus. For further information about focus, refer to the product’s Installation Guide.

Image 15

Contents Axis P3301 Fixed Dome Network Camera Intellectual Property Rights About this documentLegal Considerations LiabilityLearn More SupportAxis P3301 Fixed Dome Network Camera Table of ContentsConnectors and Buttons For technical specifications, seeHardware Overview LED Indicators Axis P3301 Fixed Dome Network Camera Access the Product Access from a BrowserStart a browser Internet Explorer, Firefox, Safari Access from the Internet Set the Root PasswordClick Create self-signed certificate Live View Controls on the Live ViewAxis Media Control viewer toolbar AMC Audio Controls Half-duplex modeHow to Stream H.264 Media StreamsAxis Media Control AMC QuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamJava applet supports simplex audio with G.711 encoding Access Audio StreamsSet Up the Product Basic SetupFocus Adjustment Video and Audio Video StreamImage 264 Click Save to apply the new settingsStream Profiles Camera SettingsGo to Video & Audio Video Stream and select the Image tab Iris adjustmentOverlay Overlay ImageAudio Settings Privacy MaskAudio Modes Audio Input Audio Output Audio ClipsDefault Viewer for Browsers Configure the Live ViewOutput Buttons Viewer SettingsGo to Setup Live View Config User Defined LinksFor more information about I/O ports, see I/O Ports on Go to Detectors Camera Tampering DetectorsCamera Tampering Motion DetectionMotion Detection Parameters Set Up Motion Detection WindowsRecommended values Default valuesAudio Detection Low level 0%Applications Go to Events Action Rules and click Add Set Up Action RulesEvents Convert Event Types to Action RulesSet Up Recurrences Add RecipientsCreate Schedules Go to Recordings List RecordingsRecording List Continuous RecordingClick Save to save and start the recording Users To log in again and be configured to use this functionalitySystem Options SecurityCertificates Date & TimeIeee Audio SupportNetwork Basic TCP/IP SettingsIPv4 Address Configuration IPv6 Address ConfigurationAdvanced TCP/IP Settings Select Use the host name to set the host name manually Link-Local IPv4 AddressNAT traversal port mapping for IPv4 Smtp email QoS Quality of ServiceBonjour StorageUPnPTM RTP/H.264Port Status MaintenancePorts & Devices PortsAdvanced SupportReset to Factory Default Settings Plain ConfigFile Upload Check the Firmware TroubleshootingUpgrade the Firmware Firmware To upgrade the product’s firmwareProduct cannot be accessed from a browser Emergency Recovery ProcedureSymptoms, Possible Causes and Remedial Actions Problems setting the IP addressProduct is accessible locally but not externally Problems with streaming H.264Basic Settings Status and Network indicator LEDs are flashing red rapidlyVideo and image problems, general Setup Video & Audio Camera SettingsTechnical Specifications Memory Power Function/group Specifications System ApplicationInstallation aids MaintenancePerformance Considerations Accessories User license, smoked transparent cover VideoM2.5

Related manuals

Manual 39 pages 20.76 Kb