Axis Communications P3301 user manual Video and Audio, Video Stream, Image

Page 16

AXIS P3301 Fixed Dome Network Camera

Video and Audio

The video and audio settings can be used to optimize video and audio quality. You can configure the following:

•Video stream settings. See page 16.

•Stream profiles. See page 18.

•Camera settings. See page 18.

•Overlay image. See page 19.

•Privacy mask. See page 20.

•Audio settings. See page 20.

•Audio clips. See page 22.

Video Stream

You can define the following video stream settings from Video & Audio > Video Stream:

•Image. See page 16.

•Audio. See page 20.

•H.264. See page 17.

•MJPEG. See page 17.

Image

The default image settings can be configured under Video & Audio > Video Stream. Select the Image tab. The following settings are available:

•Resolution. Select the default resolution.

Image 16

Contents Axis P3301 Fixed Dome Network Camera About this document Legal ConsiderationsLiability Intellectual Property RightsSupport Learn MoreTable of Contents Axis P3301 Fixed Dome Network CameraFor technical specifications, see Connectors and ButtonsHardware Overview LED Indicators Axis P3301 Fixed Dome Network Camera Access from a Browser Access the ProductStart a browser Internet Explorer, Firefox, Safari Set the Root Password Access from the InternetClick Create self-signed certificate Controls on the Live View Live ViewAxis Media Control viewer toolbar Half-duplex mode AMC Audio ControlsMedia Streams How to Stream H.264Axis Media Control AMC Alternative Methods of Accessing the Video Stream QuickTimeTM. The following paths can be usedAccess Audio Streams Java applet supports simplex audio with G.711 encodingBasic Setup Set Up the ProductFocus Adjustment Video Stream Video and AudioImage Click Save to apply the new settings 264Camera Settings Stream ProfilesIris adjustment OverlayOverlay Image Go to Video & Audio Video Stream and select the Image tabPrivacy Mask Audio SettingsAudio Modes Audio Input Audio Clips Audio OutputConfigure the Live View Default Viewer for BrowsersViewer Settings Go to Setup Live View ConfigUser Defined Links Output ButtonsFor more information about I/O ports, see I/O Ports on Detectors Camera TamperingMotion Detection Go to Detectors Camera TamperingSet Up Motion Detection Windows Motion Detection ParametersDefault values Audio DetectionLow level 0% Recommended valuesApplications Set Up Action Rules EventsConvert Event Types to Action Rules Go to Events Action Rules and click AddAdd Recipients Set Up RecurrencesCreate Schedules Recordings Recording ListContinuous Recording Go to Recordings ListClick Save to save and start the recording To log in again and be configured to use this functionality System OptionsSecurity UsersDate & Time IeeeAudio Support CertificatesBasic TCP/IP Settings IPv4 Address ConfigurationIPv6 Address Configuration NetworkAdvanced TCP/IP Settings Link-Local IPv4 Address Select Use the host name to set the host name manuallyNAT traversal port mapping for IPv4 QoS Quality of Service Smtp emailStorage UPnPTMRTP/H.264 BonjourMaintenance Ports & DevicesPorts Port StatusSupport AdvancedPlain Config Reset to Factory Default SettingsFile Upload Troubleshooting Upgrade the FirmwareFirmware To upgrade the product’s firmware Check the FirmwareEmergency Recovery Procedure Symptoms, Possible Causes and Remedial ActionsProblems setting the IP address Product cannot be accessed from a browserProblems with streaming H.264 Product is accessible locally but not externallyBasic Status and Network indicator LEDs are flashing red rapidly Video and image problems, generalSetup Video & Audio Camera Settings SettingsTechnical Specifications Function/group Specifications System Application Installation aidsMaintenance Memory PowerAccessories User license, smoked transparent cover Video Performance ConsiderationsM2.5

Related manuals

Manual 39 pages 20.76 Kb