Axis Communications P3904-R user manual Recipients, Fallback Action, Recipient Use with action

Page 33

AXIS P3904–R Network Camera

Events

The recording Duration of some actions can be set to include time immediately before and after the event. Select Pre-trigger time and/or Post-trigger time and enter the number of seconds. When While the rule is active is enabled and the action is triggered again during the post-trigger time, the recording time will be extended with another post-trigger time period.

For more information, see the online help .

Fallback Action

A fallback action is started if the primary action cannot be started, for example if connection to a recipient cannot be established.

Fallback actions are typically used to send email notifications on failed actions or to upload images to a secondary recipient.

Recipients

Recipients receive media files and notification messages. The following recipients are available:

Recipient

Use with action

 

 

Email1

Send Images

 

Send Notification

 

Send Video Clip

 

 

FTP

Send Images

 

Send Video Clip

 

 

HTTP

Send Images

 

Send Notification

 

Send Video Clip

 

 

HTTPS

Send Images

 

Send Notification

 

Send Video Clip

 

 

Network Share2

Send Images

 

Send Video Clip

 

 

TCP

Send Notification

 

 

1.Some email providers have security filters that prevent users from receiving or viewing large amount of attachments, from receiving scheduled emails and similar. Check the email provider’s security policy to avoid delivery problems and locked email accounts.

2.A network share can also be used as a storage device for recorded video. Go System Options > Storage to configure a network share before setting up a continuous recording or an action rule to record video. See Storage on page 44 for more information about storage devices.

To add a recipient:

1.Go to Events > Recipients and click Add.

2.Enter a descriptive name.

3.Select a recipient Type.

4.Enter the information needed for the recipient type.

5.Click Test to test the connection to the recipient.

6.Click OK.

33

Image 33
Contents Axis P3904-R Network Camera Legal Considerations About this DocumentLiability Intellectual Property RightsLearn More SupportAxis P3904-R Network Camera Table of ContentsNetwork Connector Connectors and ButtonsFor technical specifications, see Hardware OverviewSD Card Slot LED IndicatorsControl Button Color IndicationAccess from a Browser Accessing the ProductAccess from the Internet Set the Root PasswordLive View Set Power Line FrequencyControls on the Live View Click Use HttpsAxis Media Control viewer toolbar Go to Setup EventsPTZ Controls Manual TriggerAxis P3904-R Network Camera How to Stream H.264 Media StreamsAxis Media Control AMC QuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamAxis P3904-R Network Camera Basic Setup Setting Up the ProductVideo Stream VideoPixel Counter ImageClick Save to apply the new settings Stream Profiles264 Camera Settings View Area Select an Aspect ratio and a Video stream resolutionShutter & Gain Set Shutter toOverlay Image OverlayGo to Video Video Stream and select the Image tab Go to Video Overlay ImageGo to Events Action Rules Using Overlay Text in an Action RulePrivacy Mask Default Viewer for Browsers Live View ConfigViewer Settings Browser Viewer DescriptionUser Defined Links Go to PTZ Preset Positions Preset PositionsPTZ Pan Tilt Zoom Guard TourAdvanced Operator Same as administrator but with lower priorityControl Queue ControlsCamera Tampering DetectorsMotion Detection Go to Detectors Camera TamperingMotion Detection Parameters Set Up Motion Detection WindowsAxis P3904-R Network Camera Go to Setup Applications Install ApplicationApplications Application LicensesAxis P3904-R Network Camera Events Setting Up an Action Rule PTZ ControlGo to Events Action Rules and click Add Fallback Action RecipientsRecipient Use with action Go to Events Recipients and click AddSchedules Setting Up an Email RecipientRecurrences Go to Events Schedules and click AddRecording List RecordingsContinuous Recording Go to Recordings ListLanguages Security System OptionsUsers IP Address FilterClick Install certificate and upload the certificate Go to Setup System Options Security CertificatesDate & Time CertificatesIPv4 Address Configuration Basic TCP/IP SettingsIPv6 Address Configuration NetworkLinux/Unix syntax Assign IP Address Using ARP/PingLinux/Unix example Axis Video Hosting System AvhsAdvanced TCP/IP Settings NAT traversal port mapping for IPv4 HttpSocks QoS Quality of ServiceUPnPTM StorageRTP/H.264 BonjourPorts & Devices MaintenanceNetwork Share Port StatusSupport Overview SupportSystem Overview Logs & ReportsPlain Config Reset to Factory Default SettingsScripting File UploadEmergency Recovery Procedure TroubleshootingChecking the Firmware Upgrading the FirmwareSymptoms, Possible Causes and Remedial Actions Video and image problems, general Status and Network indicator LEDs are flashing red rapidlyVideo Camera Settings Key framesStorage disruption Storage and disk management problemsRe-mount the storage device Reformat the SD card and then click MountTechnical Specifications Alarm actions Function/group Specifications System ApplicationInstallation Maintenance General CasingPerformance Considerations ConnectorsM2.2

P3904-R specifications

Axis Communications P3904-R is a state-of-the-art network camera, specifically designed for mobile surveillance applications. It is an ideal solution for users who require high-quality video monitoring in challenging environments, such as public transport, police vehicles, and emergency services. This device exemplifies Axis’s commitment to delivering cutting-edge technology wrapped in a robust and durable design.

One of the standout features of the P3904-R is its high-resolution imaging capabilities. The camera delivers sharp 1080p video at 30 frames per second, ensuring that even fast-moving scenes are captured with clarity and detail. This is particularly crucial for applications where identifying faces or license plates is necessary. Coupled with Axis’s WDR (Wide Dynamic Range) technology, the camera performs exceptionally well in varied lighting conditions, providing clear footage even in situations where light may be uneven.

The P3904-R also boasts a compact and rugged design, built to withstand the rigors of mobile use. It is rated IP66 and IK10, making it resistant to harsh weather conditions and vandalism. This durability ensures that the camera remains operational in diverse environments, from urban streets to remote areas.

Another significant technology employed in the P3904-R is the integration of PoE (Power over Ethernet). This allows for seamless installation by powering the device through the network cable, eliminating the need for separate power supplies. The camera also supports H.264 and Motion JPEG compression formats, enabling efficient storage management and optimized bandwidth usage.

Furthermore, the P3904-R is equipped with multiple analytics capabilities. These features enhance security by enabling intelligent event detection, such as motion detection and tampering alarms. This intelligent analytics functionality improves the relevance of recorded footage, making it easier to locate significant events during review.

The camera includes audio support, further enriching its functionality. The two-way audio capability allows users to communicate through the camera, adding an extra layer of interaction and security, especially beneficial in emergency situations.

In conclusion, the Axis Communications P3904-R is a well-engineered camera offering high-definition performance, rugged reliability, and advanced features that meet the challenges of mobile surveillance. Whether used in public transportation, emergency services, or any demanding environment, it delivers exceptional video quality and operational efficiency. Its combination of durable design, sophisticated technology, and user-friendly features makes it a top choice for users seeking a reliable mobile surveillance solution.