Axis Communications P3904-R user manual Assign IP Address Using ARP/Ping, Linux/Unix syntax

Page 40

AXIS P3904–R Network Camera

System Options

Assign IP Address Using ARP/Ping

The product's IP address can be assigned using ARP/Ping. The command must be issued within 2 minutes of connecting power.

1.Acquire a free static IP address on the same network segment as the computer.

2.Locate the serial number (S/N) on the product label.

3.Open a command prompt and enter the following commands:

Linux/Unix syntax

arp -s <IP address> <serial number> temp ping -s 408 <IP address>

Linux/Unix example

arp -s 192.168.0.125 00:40:8c:18:10:00 temp ping -s 408 192.168.0.125

Windows syntax (this may require that you run the command prompt as an administrator)

arp -s <IP address> <serial number> ping -l 408 -t <IP address>

Windows example (this may require that you run the command prompt as an administrator)

arp -s 192.168.0.125 00-40-8c-18-10-00 ping -l 408 -t 192.168.0.125

4.Check that the network cable is connected and then restart the product by disconnecting and reconnecting power.

5.Close the command prompt when the product responds with Reply from 192.168.0.125:... or similar.

6.Open a browser and type http://<IP address> in the Location/Address field.

For other methods of assigning the IP address, see the Installation and Management Software CD or the document Assign an IP Address and Access the Video Stream on Axis Support web at www.axis.com/techsup

Note

To open a command prompt in Windows, open the Start menu and type cmd in the Run/Search field.

To use the ARP command in Windows 7/Windows Vista, right-click the command prompt icon and select Run as administrator.

To open a command prompt in Mac OS X, open the Terminal utility from Application > Utilities.

AXIS Video Hosting System (AVHS)

AVHS used in conjunction with an AVHS service, provides easy and secure Internet access to live and recorded video accessible from any location. For more information and help to find a local AVHS Service Provider go to www.axis.com/hosting

The AVHS settings are configured under System Options > Network > TCP IP > Basic. The possibility to connect to an AVHS service is enabled by default. To disable, clear the Enable AVHS box.

One-click enabled - Press the product’s control button (see Hardware Overview on page 5 ) to connect to an AVHS service over the Internet. Once registered, Always will be enabled and the Axis product stays connected to the AVHS service. If the product is not registered within 24 hours from when the button is pressed, the product will disconnect from the AVHS service.

Always - The Axis product will constantly attempt to connect to the AVHS service over the Internet. Once registered the product will stay connected to the service. This option can be used when the product is already installed and it is not convenient to use the one-click installation.

40

Image 40
Contents Axis P3904-R Network Camera About this Document Legal ConsiderationsLiability Intellectual Property RightsSupport Learn MoreTable of Contents Axis P3904-R Network CameraConnectors and Buttons Network ConnectorFor technical specifications, see Hardware OverviewLED Indicators SD Card SlotControl Button Color IndicationAccessing the Product Access from a BrowserAccess from the Internet Set the Root PasswordSet Power Line Frequency Live ViewControls on the Live View Click Use HttpsGo to Setup Events Axis Media Control viewer toolbarPTZ Controls Manual TriggerAxis P3904-R Network Camera Media Streams How to Stream H.264Axis Media Control AMC Alternative Methods of Accessing the Video Stream QuickTimeTM. The following paths can be usedAxis P3904-R Network Camera Setting Up the Product Basic SetupVideo Video StreamPixel Counter ImageStream Profiles Click Save to apply the new settings264 Camera Settings Select an Aspect ratio and a Video stream resolution View AreaShutter & Gain Set Shutter toOverlay Overlay ImageGo to Video Video Stream and select the Image tab Go to Video Overlay ImageUsing Overlay Text in an Action Rule Go to Events Action RulesPrivacy Mask Live View Config Default Viewer for BrowsersViewer Settings Browser Viewer DescriptionUser Defined Links Preset Positions Go to PTZ Preset PositionsPTZ Pan Tilt Zoom Guard TourOperator Same as administrator but with lower priority AdvancedControl Queue ControlsDetectors Camera TamperingMotion Detection Go to Detectors Camera TamperingSet Up Motion Detection Windows Motion Detection ParametersAxis P3904-R Network Camera Install Application Go to Setup ApplicationsApplications Application LicensesAxis P3904-R Network Camera Events PTZ Control Setting Up an Action RuleGo to Events Action Rules and click Add Recipients Fallback ActionRecipient Use with action Go to Events Recipients and click AddSetting Up an Email Recipient SchedulesRecurrences Go to Events Schedules and click AddRecordings Recording ListContinuous Recording Go to Recordings ListLanguages System Options SecurityUsers IP Address FilterGo to Setup System Options Security Certificates Click Install certificate and upload the certificateDate & Time CertificatesBasic TCP/IP Settings IPv4 Address ConfigurationIPv6 Address Configuration NetworkAssign IP Address Using ARP/Ping Linux/Unix syntaxLinux/Unix example Axis Video Hosting System AvhsAdvanced TCP/IP Settings Http NAT traversal port mapping for IPv4QoS Quality of Service SocksStorage UPnPTMRTP/H.264 BonjourMaintenance Ports & DevicesNetwork Share Port StatusSupport Support OverviewSystem Overview Logs & ReportsReset to Factory Default Settings Plain ConfigScripting File UploadTroubleshooting Emergency Recovery ProcedureChecking the Firmware Upgrading the FirmwareSymptoms, Possible Causes and Remedial Actions Status and Network indicator LEDs are flashing red rapidly Video and image problems, generalVideo Camera Settings Key framesStorage and disk management problems Storage disruptionRe-mount the storage device Reformat the SD card and then click MountTechnical Specifications Function/group Specifications System Application Alarm actionsInstallation Maintenance General CasingConnectors Performance ConsiderationsM2.2

P3904-R specifications

Axis Communications P3904-R is a state-of-the-art network camera, specifically designed for mobile surveillance applications. It is an ideal solution for users who require high-quality video monitoring in challenging environments, such as public transport, police vehicles, and emergency services. This device exemplifies Axis’s commitment to delivering cutting-edge technology wrapped in a robust and durable design.

One of the standout features of the P3904-R is its high-resolution imaging capabilities. The camera delivers sharp 1080p video at 30 frames per second, ensuring that even fast-moving scenes are captured with clarity and detail. This is particularly crucial for applications where identifying faces or license plates is necessary. Coupled with Axis’s WDR (Wide Dynamic Range) technology, the camera performs exceptionally well in varied lighting conditions, providing clear footage even in situations where light may be uneven.

The P3904-R also boasts a compact and rugged design, built to withstand the rigors of mobile use. It is rated IP66 and IK10, making it resistant to harsh weather conditions and vandalism. This durability ensures that the camera remains operational in diverse environments, from urban streets to remote areas.

Another significant technology employed in the P3904-R is the integration of PoE (Power over Ethernet). This allows for seamless installation by powering the device through the network cable, eliminating the need for separate power supplies. The camera also supports H.264 and Motion JPEG compression formats, enabling efficient storage management and optimized bandwidth usage.

Furthermore, the P3904-R is equipped with multiple analytics capabilities. These features enhance security by enabling intelligent event detection, such as motion detection and tampering alarms. This intelligent analytics functionality improves the relevance of recorded footage, making it easier to locate significant events during review.

The camera includes audio support, further enriching its functionality. The two-way audio capability allows users to communicate through the camera, adding an extra layer of interaction and security, especially beneficial in emergency situations.

In conclusion, the Axis Communications P3904-R is a well-engineered camera offering high-definition performance, rugged reliability, and advanced features that meet the challenges of mobile surveillance. Whether used in public transportation, emergency services, or any demanding environment, it delivers exceptional video quality and operational efficiency. Its combination of durable design, sophisticated technology, and user-friendly features makes it a top choice for users seeking a reliable mobile surveillance solution.