Axis Communications P3904-R user manual Socks, QoS Quality of Service

Page 43

AXIS P3904–R Network Camera

System Options

Note

H.264 video streams will not be available if the RTSP server is disabled.

SOCKS

SOCKS is a networking proxy protocol. The Axis product can be configured to use a SOCKS server to reach networks on the other side of a firewall or proxy server. This functionality is useful if the Axis product is located on a local network behind a firewall, and notifications, uploads, alarms, etc need to be sent to a destination outside the local network (for example the Internet).

SOCKS is configured under System Options > Network > SOCKS. For more information, see the online help .

QoS (Quality of Service)

QoS (Quality of Service) guarantees a certain level of a specified resource to selected traffic on a network. A QoS-aware network prioritizes network traffic and provides a greater network reliability by controlling the amount of bandwidth an application may use.

The QoS settings are configured under System Options > Network > QoS. Using DSCP (Differentiated Services Codepoint) values, the Axis product can mark the following types of traffic: live video, event/alarm traffic and management traffic.

SNMP

The Simple Network Management Protocol (SNMP) allows remote management of network devices. An SNMP community is the group of devices and management station running SNMP. Community names are used to identify groups.

The Axis product can be configured to support SNMP on the System Options > Network > SNMP page.

Depending on the level of security required, select the version on SNMP to use.

SNMP v1/v2 provides the lowest level of security. The community name can be specified as a password for read or read/write access to all supported SNMP devices. The default password for the Read community is public and the default password for the Write community is write.

Note

If HTTPS is enabled, SNMP v1 and SNMP v2c should be disabled.

Traps for SNMP v1/v2 are used by the Axis product to send messages to a management system on important events and status changes. Check Enable traps and enter the IP address where the trap message should be sent and the Trap community that should receive the message.

The following traps are available:

Cold start

Warm start

Link up

Authentication failed

SNMP v3 provides encryption and secure passwords. To use traps with SNMP v3, an SNMP v3 management application is required.

To use SNMP v3, HTTPS must be enabled, see HTTPS on page 37. To enable SNMP v3, check the box and provide the initial user password.

Note

The initial password can only be set once. If the password is lost, the Axis product must be reset to factory default, see Reset to Factory Default Settings on page 47.

43

Image 43
Contents Axis P3904-R Network Camera Intellectual Property Rights About this DocumentLegal Considerations LiabilityLearn More SupportAxis P3904-R Network Camera Table of ContentsHardware Overview Connectors and ButtonsNetwork Connector For technical specifications, seeColor Indication LED IndicatorsSD Card Slot Control ButtonSet the Root Password Accessing the ProductAccess from a Browser Access from the InternetClick Use Https Set Power Line FrequencyLive View Controls on the Live ViewManual Trigger Go to Setup EventsAxis Media Control viewer toolbar PTZ ControlsAxis P3904-R Network Camera Media Streams How to Stream H.264Axis Media Control AMC QuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamAxis P3904-R Network Camera Basic Setup Setting Up the ProductImage VideoVideo Stream Pixel CounterStream Profiles Click Save to apply the new settings264 Camera Settings Set Shutter to Select an Aspect ratio and a Video stream resolutionView Area Shutter & GainGo to Video Overlay Image OverlayOverlay Image Go to Video Video Stream and select the Image tabGo to Events Action Rules Using Overlay Text in an Action RulePrivacy Mask Browser Viewer Description Live View ConfigDefault Viewer for Browsers Viewer SettingsUser Defined Links Guard Tour Preset PositionsGo to PTZ Preset Positions PTZ Pan Tilt ZoomControls Operator Same as administrator but with lower priorityAdvanced Control QueueGo to Detectors Camera Tampering DetectorsCamera Tampering Motion DetectionMotion Detection Parameters Set Up Motion Detection WindowsAxis P3904-R Network Camera Application Licenses Install ApplicationGo to Setup Applications ApplicationsAxis P3904-R Network Camera Events PTZ Control Setting Up an Action RuleGo to Events Action Rules and click Add Go to Events Recipients and click Add RecipientsFallback Action Recipient Use with actionGo to Events Schedules and click Add Setting Up an Email RecipientSchedules RecurrencesGo to Recordings List RecordingsRecording List Continuous RecordingLanguages IP Address Filter System OptionsSecurity UsersCertificates Go to Setup System Options Security CertificatesClick Install certificate and upload the certificate Date & TimeNetwork Basic TCP/IP SettingsIPv4 Address Configuration IPv6 Address ConfigurationAxis Video Hosting System Avhs Assign IP Address Using ARP/PingLinux/Unix syntax Linux/Unix exampleAdvanced TCP/IP Settings NAT traversal port mapping for IPv4 HttpSocks QoS Quality of ServiceBonjour StorageUPnPTM RTP/H.264Port Status MaintenancePorts & Devices Network ShareLogs & Reports SupportSupport Overview System OverviewFile Upload Reset to Factory Default SettingsPlain Config ScriptingUpgrading the Firmware TroubleshootingEmergency Recovery Procedure Checking the FirmwareSymptoms, Possible Causes and Remedial Actions Key frames Status and Network indicator LEDs are flashing red rapidlyVideo and image problems, general Video Camera SettingsReformat the SD card and then click Mount Storage and disk management problemsStorage disruption Re-mount the storage deviceTechnical Specifications Maintenance General Casing Function/group Specifications System ApplicationAlarm actions InstallationPerformance Considerations ConnectorsM2.2

P3904-R specifications

Axis Communications P3904-R is a state-of-the-art network camera, specifically designed for mobile surveillance applications. It is an ideal solution for users who require high-quality video monitoring in challenging environments, such as public transport, police vehicles, and emergency services. This device exemplifies Axis’s commitment to delivering cutting-edge technology wrapped in a robust and durable design.

One of the standout features of the P3904-R is its high-resolution imaging capabilities. The camera delivers sharp 1080p video at 30 frames per second, ensuring that even fast-moving scenes are captured with clarity and detail. This is particularly crucial for applications where identifying faces or license plates is necessary. Coupled with Axis’s WDR (Wide Dynamic Range) technology, the camera performs exceptionally well in varied lighting conditions, providing clear footage even in situations where light may be uneven.

The P3904-R also boasts a compact and rugged design, built to withstand the rigors of mobile use. It is rated IP66 and IK10, making it resistant to harsh weather conditions and vandalism. This durability ensures that the camera remains operational in diverse environments, from urban streets to remote areas.

Another significant technology employed in the P3904-R is the integration of PoE (Power over Ethernet). This allows for seamless installation by powering the device through the network cable, eliminating the need for separate power supplies. The camera also supports H.264 and Motion JPEG compression formats, enabling efficient storage management and optimized bandwidth usage.

Furthermore, the P3904-R is equipped with multiple analytics capabilities. These features enhance security by enabling intelligent event detection, such as motion detection and tampering alarms. This intelligent analytics functionality improves the relevance of recorded footage, making it easier to locate significant events during review.

The camera includes audio support, further enriching its functionality. The two-way audio capability allows users to communicate through the camera, adding an extra layer of interaction and security, especially beneficial in emergency situations.

In conclusion, the Axis Communications P3904-R is a well-engineered camera offering high-definition performance, rugged reliability, and advanced features that meet the challenges of mobile surveillance. Whether used in public transportation, emergency services, or any demanding environment, it delivers exceptional video quality and operational efficiency. Its combination of durable design, sophisticated technology, and user-friendly features makes it a top choice for users seeking a reliable mobile surveillance solution.