Axis Communications P3904-R LED Indicators, SD Card Slot, Control Button, Color Indication

Page 6

AXIS P3904–R Network Camera

Hardware Overview

NOTICE

Due to local regulations or the environmental and electrical conditions in which the product is to be used, a shielded network cable (STP) may be appropriate or required. All cables connecting the product to the network and that are routed outdoors or in demanding electrical environments shall be intended for their specific use. Make sure that the network devices

are installed in accordance with the manufacturer’s instructions. For information about regulatory requirements, see Electromagnetic Compatibility (EMC) on page 2 .

SD Card Slot

A microSD card (not included) can be used for local recording with removable storage. For more information, see Technical Specifications on page 52.

NOTICE

To prevent corruption of recordings, the SD card should be unmounted before removal. To unmount, go to Setup > System Options > Storage > SD Card and click Unmount.

Control Button

The control button is used for:

Resetting the product to factory default settings. See page 47.

Connecting to an AXIS Video Hosting System service. See page 40. To connect, press and hold the button for about 1 second until the Status LED flashes green.

Connecting to AXIS Internet Dynamic DNS Service. See page 41. To connect, press and hold the button for about 3 seconds.

LED Indicators

LED

Color

Indication

 

 

 

Network

Green

Steady for connection to a 100 Mbit/s network. Flashes for network activity.

 

 

 

 

Amber

Steady for connection to a 10 Mbit/s network. Flashes for network activity.

 

 

 

 

Unlit

No network connection.

 

 

 

Status

Green

Steady green for normal operation.

 

 

 

 

Amber

Steady during startup and when restoring settings.

 

 

 

 

Red

Slow flash for failed upgrade.

 

 

 

Power

Green

Normal operation.

 

 

 

 

Amber

Flashes green/amber during firmware upgrade.

 

 

 

Note

The Status LED can be configured to be unlit during normal operation. To configure, go to Setup > System Options > Ports & Devices > LED. See the online help for more information.

The Status LED can be configured to flash while an event is active.

The Status LED can be configured to flash for identifying the unit. Go to Setup > System Options > Maintenance .

The Network LED can be disabled so that it does not flash when there is network traffic. To configure, go to Setup > System Options > Ports & Devices > LED. See the online help for more information.

6

Image 6
Contents Axis P3904-R Network Camera Liability About this DocumentLegal Considerations Intellectual Property RightsSupport Learn MoreTable of Contents Axis P3904-R Network CameraFor technical specifications, see Connectors and ButtonsNetwork Connector Hardware OverviewControl Button LED IndicatorsSD Card Slot Color IndicationAccess from the Internet Accessing the ProductAccess from a Browser Set the Root PasswordControls on the Live View Set Power Line FrequencyLive View Click Use HttpsPTZ Controls Go to Setup EventsAxis Media Control viewer toolbar Manual TriggerAxis P3904-R Network Camera How to Stream H.264 Media StreamsAxis Media Control AMC Alternative Methods of Accessing the Video Stream QuickTimeTM. The following paths can be usedAxis P3904-R Network Camera Setting Up the Product Basic SetupPixel Counter VideoVideo Stream ImageClick Save to apply the new settings Stream Profiles264 Camera Settings Shutter & Gain Select an Aspect ratio and a Video stream resolutionView Area Set Shutter toGo to Video Video Stream and select the Image tab OverlayOverlay Image Go to Video Overlay ImageUsing Overlay Text in an Action Rule Go to Events Action RulesPrivacy Mask Viewer Settings Live View ConfigDefault Viewer for Browsers Browser Viewer DescriptionUser Defined Links PTZ Pan Tilt Zoom Preset PositionsGo to PTZ Preset Positions Guard TourControl Queue Operator Same as administrator but with lower priorityAdvanced ControlsMotion Detection DetectorsCamera Tampering Go to Detectors Camera TamperingSet Up Motion Detection Windows Motion Detection ParametersAxis P3904-R Network Camera Applications Install ApplicationGo to Setup Applications Application LicensesAxis P3904-R Network Camera Events Setting Up an Action Rule PTZ ControlGo to Events Action Rules and click Add Recipient Use with action RecipientsFallback Action Go to Events Recipients and click AddRecurrences Setting Up an Email RecipientSchedules Go to Events Schedules and click AddContinuous Recording RecordingsRecording List Go to Recordings ListLanguages Users System OptionsSecurity IP Address FilterDate & Time Go to Setup System Options Security CertificatesClick Install certificate and upload the certificate CertificatesIPv6 Address Configuration Basic TCP/IP SettingsIPv4 Address Configuration NetworkLinux/Unix example Assign IP Address Using ARP/PingLinux/Unix syntax Axis Video Hosting System AvhsAdvanced TCP/IP Settings Http NAT traversal port mapping for IPv4QoS Quality of Service SocksRTP/H.264 StorageUPnPTM BonjourNetwork Share MaintenancePorts & Devices Port StatusSystem Overview SupportSupport Overview Logs & ReportsScripting Reset to Factory Default SettingsPlain Config File UploadChecking the Firmware TroubleshootingEmergency Recovery Procedure Upgrading the FirmwareSymptoms, Possible Causes and Remedial Actions Video Camera Settings Status and Network indicator LEDs are flashing red rapidlyVideo and image problems, general Key framesRe-mount the storage device Storage and disk management problemsStorage disruption Reformat the SD card and then click MountTechnical Specifications Installation Function/group Specifications System ApplicationAlarm actions Maintenance General CasingConnectors Performance ConsiderationsM2.2

P3904-R specifications

Axis Communications P3904-R is a state-of-the-art network camera, specifically designed for mobile surveillance applications. It is an ideal solution for users who require high-quality video monitoring in challenging environments, such as public transport, police vehicles, and emergency services. This device exemplifies Axis’s commitment to delivering cutting-edge technology wrapped in a robust and durable design.

One of the standout features of the P3904-R is its high-resolution imaging capabilities. The camera delivers sharp 1080p video at 30 frames per second, ensuring that even fast-moving scenes are captured with clarity and detail. This is particularly crucial for applications where identifying faces or license plates is necessary. Coupled with Axis’s WDR (Wide Dynamic Range) technology, the camera performs exceptionally well in varied lighting conditions, providing clear footage even in situations where light may be uneven.

The P3904-R also boasts a compact and rugged design, built to withstand the rigors of mobile use. It is rated IP66 and IK10, making it resistant to harsh weather conditions and vandalism. This durability ensures that the camera remains operational in diverse environments, from urban streets to remote areas.

Another significant technology employed in the P3904-R is the integration of PoE (Power over Ethernet). This allows for seamless installation by powering the device through the network cable, eliminating the need for separate power supplies. The camera also supports H.264 and Motion JPEG compression formats, enabling efficient storage management and optimized bandwidth usage.

Furthermore, the P3904-R is equipped with multiple analytics capabilities. These features enhance security by enabling intelligent event detection, such as motion detection and tampering alarms. This intelligent analytics functionality improves the relevance of recorded footage, making it easier to locate significant events during review.

The camera includes audio support, further enriching its functionality. The two-way audio capability allows users to communicate through the camera, adding an extra layer of interaction and security, especially beneficial in emergency situations.

In conclusion, the Axis Communications P3904-R is a well-engineered camera offering high-definition performance, rugged reliability, and advanced features that meet the challenges of mobile surveillance. Whether used in public transportation, emergency services, or any demanding environment, it delivers exceptional video quality and operational efficiency. Its combination of durable design, sophisticated technology, and user-friendly features makes it a top choice for users seeking a reliable mobile surveillance solution.