Axis Communications P1427-LE user manual PTZ Controls

Page 11

AXIS P1427–LE Network Camera

Accessing the Product

Click the View Full Screen button and the video image will fill the entire screen. Press ESC (Escape) on the computer keyboard to cancel full screen view.

The Record button is used to record the current video stream. The location where the recording is saved can be specified in the AMC Control Panel. Enable this button from Live View Config > Viewer Settings.

PTZ Controls

The Live View page also displays Pan/Tilt/Zoom (PTZ) controls. The administrator can enable/disable controls for specified users under System Options > Security > Users.

Note

These controls are available if digital PTZ is enabled in the selected view area, see View Area on page 20.

With the PTZ Control Queue enabled the time each user is in control of the PTZ settings is limited. Click the buttons to request or release control of the PTZ controls. The PTZ Control Queue is set up under PTZ > Control Queue.

Click the Emulate joystick mode button and click in the image to move the camera view in the direction of the mouse pointer.

Click the Center mode button and click in the image to center the camera view on that position. The center mode button could also be used to zoom in on a specific area. Click in the image and drag to draw a rectangle surrounding the area to be magnified. To zoom out, rotate the mouse wheel.

Click the Ctrl panel button to open the PTZ control panel which provides additional PTZ controls.

User-defined buttons can also appear in the Control panel. See Controls on page 28.

To view a specific view area or preset position, select it from the Source list.

Pan and Tilt bars – Use the arrows to pan and tilt the camera view, or click on a position on the bar to steer the camera view to that position.

Brightness bar – Click on a position on the brightness bar to adjust the image brightness. This setting will not be saved. To make a saved change, go to Setup > Video > Camera Settings > Brightness and adjust the brightness.

Clicking Zoom out to overview image will set the camera to the minimum zoom position. In this position, the camera

cannot pan or tilt.

The PTZ controls can be disabled under PTZ > Advanced > Controls, see Controls on page 28.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Axis P1427-LE Network Camera Intellectual Property Rights About this DocumentLegal Considerations LiabilityLearn More SupportAxis P1427-LE Network Camera Table of ContentsPerformance Considerations Hardware Overview Connectors and ButtonsNetwork Connector ConnectorColor Indication LED IndicatorsSD Card Slot Control ButtonSet the Root Password Accessing the ProductAccess from a Browser Access from the InternetControls on the Live View Configure Capture ModeSet Power Line Frequency Live ViewManual Trigger Go to Setup EventsAxis Media Control viewer toolbar PTZ Controls Axis Media Control AMC How to Stream H.264Media Streams Alternative Methods of Accessing the Video Stream Axis P1427-LE Network Camera Basic Setup Setting Up the ProductImage VideoVideo Stream Pixel Counter264 Stream ProfilesImage Appearance Camera SettingsCapture Mode Go to Setup Video Camera SettingsShutter & Gain Exposure SettingsWhite Balance Wide Dynamic RangeDay/Night Iris adjustmentView Area Built-in IR Illuminations LEDsGo to Video View Area Select an Aspect ratio and a Video stream resolutionOverlay Overlay ImageGo to Events Action Rules Using Overlay Text in an Action RuleGo to Video Overlay Image Go to Video Focus & Zoom Privacy MaskFocus & Zoom Axis P1427-LE Network Camera Browser Viewer Description Live View ConfigDefault Viewer for Browsers Viewer SettingsOutput Buttons Go to Setup Live View ConfigUser Defined Links Light ButtonsGuard Tour Preset PositionsGo to PTZ Preset Positions PTZ Pan Tilt ZoomControls AdvancedControl Queue Go to Detectors Camera Tampering DetectorsCamera Tampering Motion DetectionMotion Detection Parameters Set Up Motion Detection WindowsAxis P1427-LE Network Camera Application Licenses Install ApplicationGo to Setup Applications ApplicationsAxis P1427-LE Network Camera Events Go to Events Action Rules and click Add Setting Up an Action RuleTime PTZ ControlGo to Events Recipients and click Add RecipientsFallback Action Recipient Use with actionGo to Events Schedules and click Add Setting Up an Email RecipientSchedules RecurrencesAxis P1427-LE Network Camera Go to Recordings List RecordingsRecording List Continuous RecordingLanguages IP Address Filter System OptionsSecurity UsersGo to System Options Security Ieee IeeeCertificates Network Basic TCP/IP SettingsGo to Setup System Options Security Certificates Date & TimeARP/Ping IPv4 Address ConfigurationIPv6 Address Configuration Assign IP Address Using ARP/PingAxis Video Hosting System Avhs Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service DNS ConfigurationNAT traversal port mapping for IPv4 NTP ConfigurationHost Name Configuration Link-Local IPv4 AddressFTP QoS Quality of ServiceBonjour StorageUPnPTM RTP/H.264Go to System Options Storage Click Network Share Network ShareGo to System Options Storage and click SD Card Support MaintenancePorts & Devices File Upload System OverviewLogs & Reports ScriptingPlain Config Reset to Factory Default SettingsUpgrading the Firmware TroubleshootingEmergency Recovery Procedure Checking the FirmwareProduct is accessible locally but not externally Symptoms, Possible Causes and Remedial ActionsProblems setting the IP address Product cannot be accessed from a browserKey frames Problems with streaming H.264Video and image problems, general Video Camera SettingsStorage disruption Storage and disk management problemsTechnical Specifications Dimensions Function/group Specifications System ApplicationPower ConnectorsConnectors Performance Considerations M2.4

P1427-LE specifications

The Axis Communications P1427-LE is a cutting-edge network camera designed for exceptional surveillance and monitoring in diverse environments. Renowned for its robust build quality and advanced technological features, the P1427-LE is a crucial asset for security professionals and organizations seeking high-performance video surveillance solutions.

One of the standout features of the P1427-LE is its exceptional image quality. The camera utilizes a 4 MP sensor, which delivers crisp and clear video footage, ensuring that even the finest details are captured accurately. With a wide dynamic range (WDR) capability, the camera can effectively handle challenging lighting conditions, rendering clear images in both bright and dark areas simultaneously. This adaptability makes it an ideal choice for environments with varying light conditions, such as entrances and exits.

The P1427-LE is also equipped with sophisticated low-light performance capabilities, allowing for enhanced visibility in dimly lit locations. Thanks to its Lightfinder technology, the camera can deliver color images in near-total darkness, ensuring around-the-clock surveillance reliability.

Durability is another key aspect of the P1427-LE. Designed to withstand harsh weather conditions, the camera complies with IP66 and NEMA 4X standards, making it suitable for both indoor and outdoor use, including extreme environments. Its rugged construction and IK10 rating for impact resistance provide additional peace of mind regarding physical security.

The camera features advanced analytics capabilities, including motion detection and event-triggered recording, allowing users to efficiently monitor areas of interest. Additionally, its built-in AXIS Object Analytics and AXIS Perimeter Defender applications facilitate smarter video surveillance by reducing false alarms and enhancing situational awareness.

Connectivity is also a major highlight of the P1427-LE. With Power over Ethernet (PoE), the installation process is simplified, as both power and data can be transmitted through a single cable. This feature not only reduces installation costs but also enhances flexibility in positioning the camera.

In conclusion, the Axis Communications P1427-LE is a versatile and high-performance network camera that excels in various applications. Its combination of superior image quality, robust durability, advanced analytics, and user-friendly installation makes it an invaluable tool for enhancing security and ensuring reliable surveillance in any setting. Whether used for commercial, industrial, or public safety applications, the P1427-LE stands out as a leader in modern surveillance technology.
Top Page Image Contents