Axis Communications P1427-LE user manual Recipients, Fallback Action, Recipient Use with action

Page 36

AXIS P1427–LE Network Camera

Events

8.Select Network Share from the Storage drop-down list.

9.Optionally, select the Fallback action option to, for example, send an email notification if the recording does not start. See Fallback Action on page 36.

To use more than one trigger for the action rule, select Additional conditions and click Add to add additional triggers. When using additional conditions, all conditions must be met to trigger the action.

To prevent an action from being triggered repeatedly, a Wait at least time can be set. Enter the time in hours, minutes and seconds, during which the trigger should be ignored before the action rule can be activated again.

The recording Duration of some actions can be set to include time immediately before and after the event. Select Pre-trigger time and/or Post-trigger time and enter the number of seconds. When While the rule is active is enabled and the action is triggered again during the post-trigger time, the recording time will be extended with another post-trigger time period.

For more information, see the online help .

Fallback Action

A fallback action is started if the primary action cannot be started, for example if connection to a recipient cannot be established.

Fallback actions are typically used to send email notifications on failed actions or to upload images to a secondary recipient.

Recipients

Recipients receive media files and notification messages. The following recipients are available:

Recipient

Use with action

 

 

Email1

Send Images

 

Send Notification

 

Send Video Clip

 

 

FTP

Send Images

 

Send Video Clip

 

 

HTTP

Send Images

 

Send Notification

 

Send Video Clip

 

 

HTTPS

Send Images

 

Send Notification

 

Send Video Clip

 

 

Network Share2

Send Images

 

Send Video Clip

 

 

TCP

Send Notification

 

 

1.Some email providers have security filters that prevent users from receiving or viewing large amount of attachments, from receiving scheduled emails and similar. Check the email provider’s security policy to avoid delivery problems and locked email accounts.

2.A network share can also be used as a storage device for recorded video. Go System Options > Storage to configure a network share before setting up a continuous recording or an action rule to record video. See Storage on page 48 for more information about storage devices.

To add a recipient:

1. Go to Events > Recipients and click Add.

36

Image 36
Contents Axis P1427-LE Network Camera About this Document Legal ConsiderationsLiability Intellectual Property RightsSupport Learn MoreTable of Contents Axis P1427-LE Network CameraPerformance Considerations Connectors and Buttons Network ConnectorConnector Hardware OverviewLED Indicators SD Card SlotControl Button Color IndicationAccessing the Product Access from a BrowserAccess from the Internet Set the Root PasswordConfigure Capture Mode Set Power Line FrequencyLive View Controls on the Live ViewGo to Setup Events Axis Media Control viewer toolbarManual Trigger PTZ Controls How to Stream H.264 Media StreamsAxis Media Control AMC Alternative Methods of Accessing the Video Stream Axis P1427-LE Network Camera Setting Up the Product Basic SetupVideo Video StreamPixel Counter ImageStream Profiles 264Camera Settings Capture ModeGo to Setup Video Camera Settings Image AppearanceExposure Settings White BalanceWide Dynamic Range Shutter & GainIris adjustment View AreaBuilt-in IR Illuminations LEDs Day/NightSelect an Aspect ratio and a Video stream resolution OverlayOverlay Image Go to Video View AreaUsing Overlay Text in an Action Rule Go to Video Overlay ImageGo to Events Action Rules Privacy Mask Focus & ZoomGo to Video Focus & Zoom Axis P1427-LE Network Camera Live View Config Default Viewer for BrowsersViewer Settings Browser Viewer DescriptionGo to Setup Live View Config User Defined LinksLight Buttons Output ButtonsPreset Positions Go to PTZ Preset PositionsPTZ Pan Tilt Zoom Guard TourAdvanced Control QueueControls Detectors Camera TamperingMotion Detection Go to Detectors Camera TamperingSet Up Motion Detection Windows Motion Detection ParametersAxis P1427-LE Network Camera Install Application Go to Setup ApplicationsApplications Application LicensesAxis P1427-LE Network Camera Events Setting Up an Action Rule TimePTZ Control Go to Events Action Rules and click AddRecipients Fallback ActionRecipient Use with action Go to Events Recipients and click AddSetting Up an Email Recipient SchedulesRecurrences Go to Events Schedules and click AddAxis P1427-LE Network Camera Recordings Recording ListContinuous Recording Go to Recordings ListLanguages System Options SecurityUsers IP Address FilterIeee CertificatesGo to System Options Security Ieee Basic TCP/IP Settings Go to Setup System Options Security CertificatesDate & Time NetworkIPv4 Address Configuration IPv6 Address ConfigurationAssign IP Address Using ARP/Ping ARP/PingAdvanced TCP/IP Settings Axis Internet Dynamic DNS ServiceDNS Configuration Axis Video Hosting System AvhsNTP Configuration Host Name ConfigurationLink-Local IPv4 Address NAT traversal port mapping for IPv4QoS Quality of Service FTPStorage UPnPTMRTP/H.264 BonjourNetwork Share Go to System Options Storage and click SD CardGo to System Options Storage Click Network Share Maintenance Ports & DevicesSupport System Overview Logs & ReportsScripting File UploadReset to Factory Default Settings Plain ConfigTroubleshooting Emergency Recovery ProcedureChecking the Firmware Upgrading the FirmwareSymptoms, Possible Causes and Remedial Actions Problems setting the IP addressProduct cannot be accessed from a browser Product is accessible locally but not externallyProblems with streaming H.264 Video and image problems, generalVideo Camera Settings Key framesStorage and disk management problems Storage disruptionTechnical Specifications Function/group Specifications System Application PowerConnectors DimensionsConnectors Performance Considerations M2.4

P1427-LE specifications

The Axis Communications P1427-LE is a cutting-edge network camera designed for exceptional surveillance and monitoring in diverse environments. Renowned for its robust build quality and advanced technological features, the P1427-LE is a crucial asset for security professionals and organizations seeking high-performance video surveillance solutions.

One of the standout features of the P1427-LE is its exceptional image quality. The camera utilizes a 4 MP sensor, which delivers crisp and clear video footage, ensuring that even the finest details are captured accurately. With a wide dynamic range (WDR) capability, the camera can effectively handle challenging lighting conditions, rendering clear images in both bright and dark areas simultaneously. This adaptability makes it an ideal choice for environments with varying light conditions, such as entrances and exits.

The P1427-LE is also equipped with sophisticated low-light performance capabilities, allowing for enhanced visibility in dimly lit locations. Thanks to its Lightfinder technology, the camera can deliver color images in near-total darkness, ensuring around-the-clock surveillance reliability.

Durability is another key aspect of the P1427-LE. Designed to withstand harsh weather conditions, the camera complies with IP66 and NEMA 4X standards, making it suitable for both indoor and outdoor use, including extreme environments. Its rugged construction and IK10 rating for impact resistance provide additional peace of mind regarding physical security.

The camera features advanced analytics capabilities, including motion detection and event-triggered recording, allowing users to efficiently monitor areas of interest. Additionally, its built-in AXIS Object Analytics and AXIS Perimeter Defender applications facilitate smarter video surveillance by reducing false alarms and enhancing situational awareness.

Connectivity is also a major highlight of the P1427-LE. With Power over Ethernet (PoE), the installation process is simplified, as both power and data can be transmitted through a single cable. This feature not only reduces installation costs but also enhances flexibility in positioning the camera.

In conclusion, the Axis Communications P1427-LE is a versatile and high-performance network camera that excels in various applications. Its combination of superior image quality, robust durability, advanced analytics, and user-friendly installation makes it an invaluable tool for enhancing security and ensuring reliable surveillance in any setting. Whether used for commercial, industrial, or public safety applications, the P1427-LE stands out as a leader in modern surveillance technology.