Axis Communications P1427-LE user manual Events

Page 34

AXIS P1427–LE Network Camera

Events

Events

The Axis product can be configured to perform actions when different events occur, for example, start a recording when motion is detected. The set of conditions that defines how and when the action is triggered is called an Action Rule.

Available action rule triggers and conditions include:

Applications – Use installed applications to trigger the rule. See Applications on page 32.

Detectors

-Day/Night Mode – Trigger the rule when the product switches between day mode (IR cut filter on) and night mode (IR cut filter off). This can for example be used to control an external infrared (IR) light connected

to an output port.

-Live Stream Accessed – Trigger the rule when any stream is accessed and during edge storage playback. This can for example be used to send notifications.

-Motion Detection – Trigger the rule when motion is detected. See Motion Detection on page 29.

-Tampering – Trigger the rule when tampering is detected. See Camera Tampering on page 29.

Hardware

-Network – Trigger the rule if network connection is lost or restored. This can for example be used to start recording to the SD card.

-Temperature – Trigger the rule if the temperature falls outside or inside the operating range of the product. This can for example be used to send maintenance notifications.

Input Signal

-Digital Input Port – Trigger the rule when an I/O port receives a signal from a connected device. See I/O Ports on page 50.

-Manual Trigger – Trigger the rule using the Manual Trigger button in the Live View page. See Controls on the Live View Page on page 9 . This can for example be used to validate actions during product installation and configuration.

-Virtual Inputs – can be used by a VMS (Video Management System) to trigger actions. Virtual inputs can, for example, be connected to buttons in the VMS user interface.

PTZ

-Moving – Trigger the rule when the camera view moves due to a PTZ operation. This can for example be used as an additional condition to prevent an action rule triggered by motion detection to record video while the camera view moves due to a PTZ operation.

-Preset Reached – Trigger the rule when the camera stops at a preset position. This can be for example be used with the Send Images action to upload images from the preset position.

Storage

-Disruption – Trigger the rule if storage problems are detected, for example if the storage device is unavailable, removed, full, locked or if other read or write problems occur. This can for example be used to send maintenance notifications.

-Recording – Triggers the rule when the Axis product records to the storage device. The recording status trigger can be used to notify the operator, for example by flashing LED lights, if the product has started or stopped to record to the storage device. Note that, this trigger can be used only for edge storage recording status.

System

34

Image 34
Contents Axis P1427-LE Network Camera Liability About this DocumentLegal Considerations Intellectual Property RightsSupport Learn MoreTable of Contents Axis P1427-LE Network CameraPerformance Considerations Connector Connectors and ButtonsNetwork Connector Hardware OverviewControl Button LED IndicatorsSD Card Slot Color IndicationAccess from the Internet Accessing the ProductAccess from a Browser Set the Root PasswordLive View Configure Capture ModeSet Power Line Frequency Controls on the Live ViewAxis Media Control viewer toolbar Go to Setup EventsManual Trigger PTZ Controls Media Streams How to Stream H.264Axis Media Control AMC Alternative Methods of Accessing the Video Stream Axis P1427-LE Network Camera Setting Up the Product Basic SetupPixel Counter VideoVideo Stream ImageStream Profiles 264Go to Setup Video Camera Settings Camera SettingsCapture Mode Image AppearanceWide Dynamic Range Exposure SettingsWhite Balance Shutter & GainBuilt-in IR Illuminations LEDs Iris adjustmentView Area Day/NightOverlay Image Select an Aspect ratio and a Video stream resolutionOverlay Go to Video View AreaGo to Video Overlay Image Using Overlay Text in an Action RuleGo to Events Action Rules Focus & Zoom Privacy MaskGo to Video Focus & Zoom Axis P1427-LE Network Camera Viewer Settings Live View ConfigDefault Viewer for Browsers Browser Viewer DescriptionLight Buttons Go to Setup Live View ConfigUser Defined Links Output ButtonsPTZ Pan Tilt Zoom Preset PositionsGo to PTZ Preset Positions Guard TourControl Queue AdvancedControls Motion Detection DetectorsCamera Tampering Go to Detectors Camera TamperingSet Up Motion Detection Windows Motion Detection ParametersAxis P1427-LE Network Camera Applications Install ApplicationGo to Setup Applications Application LicensesAxis P1427-LE Network Camera Events PTZ Control Setting Up an Action RuleTime Go to Events Action Rules and click AddRecipient Use with action RecipientsFallback Action Go to Events Recipients and click AddRecurrences Setting Up an Email RecipientSchedules Go to Events Schedules and click AddAxis P1427-LE Network Camera Continuous Recording RecordingsRecording List Go to Recordings ListLanguages Users System OptionsSecurity IP Address FilterCertificates IeeeGo to System Options Security Ieee Date & Time Basic TCP/IP SettingsGo to Setup System Options Security Certificates NetworkAssign IP Address Using ARP/Ping IPv4 Address ConfigurationIPv6 Address Configuration ARP/PingDNS Configuration Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service Axis Video Hosting System AvhsLink-Local IPv4 Address NTP ConfigurationHost Name Configuration NAT traversal port mapping for IPv4QoS Quality of Service FTPRTP/H.264 StorageUPnPTM BonjourGo to System Options Storage and click SD Card Network ShareGo to System Options Storage Click Network Share Ports & Devices MaintenanceSupport Scripting System OverviewLogs & Reports File UploadReset to Factory Default Settings Plain ConfigChecking the Firmware TroubleshootingEmergency Recovery Procedure Upgrading the FirmwareProduct cannot be accessed from a browser Symptoms, Possible Causes and Remedial ActionsProblems setting the IP address Product is accessible locally but not externallyVideo Camera Settings Problems with streaming H.264Video and image problems, general Key framesStorage and disk management problems Storage disruptionTechnical Specifications Connectors Function/group Specifications System ApplicationPower DimensionsConnectors Performance Considerations M2.4

P1427-LE specifications

The Axis Communications P1427-LE is a cutting-edge network camera designed for exceptional surveillance and monitoring in diverse environments. Renowned for its robust build quality and advanced technological features, the P1427-LE is a crucial asset for security professionals and organizations seeking high-performance video surveillance solutions.

One of the standout features of the P1427-LE is its exceptional image quality. The camera utilizes a 4 MP sensor, which delivers crisp and clear video footage, ensuring that even the finest details are captured accurately. With a wide dynamic range (WDR) capability, the camera can effectively handle challenging lighting conditions, rendering clear images in both bright and dark areas simultaneously. This adaptability makes it an ideal choice for environments with varying light conditions, such as entrances and exits.

The P1427-LE is also equipped with sophisticated low-light performance capabilities, allowing for enhanced visibility in dimly lit locations. Thanks to its Lightfinder technology, the camera can deliver color images in near-total darkness, ensuring around-the-clock surveillance reliability.

Durability is another key aspect of the P1427-LE. Designed to withstand harsh weather conditions, the camera complies with IP66 and NEMA 4X standards, making it suitable for both indoor and outdoor use, including extreme environments. Its rugged construction and IK10 rating for impact resistance provide additional peace of mind regarding physical security.

The camera features advanced analytics capabilities, including motion detection and event-triggered recording, allowing users to efficiently monitor areas of interest. Additionally, its built-in AXIS Object Analytics and AXIS Perimeter Defender applications facilitate smarter video surveillance by reducing false alarms and enhancing situational awareness.

Connectivity is also a major highlight of the P1427-LE. With Power over Ethernet (PoE), the installation process is simplified, as both power and data can be transmitted through a single cable. This feature not only reduces installation costs but also enhances flexibility in positioning the camera.

In conclusion, the Axis Communications P1427-LE is a versatile and high-performance network camera that excels in various applications. Its combination of superior image quality, robust durability, advanced analytics, and user-friendly installation makes it an invaluable tool for enhancing security and ensuring reliable surveillance in any setting. Whether used for commercial, industrial, or public safety applications, the P1427-LE stands out as a leader in modern surveillance technology.