Axis Communications P1405-E user manual Storage, SD Card, Network Share, To add a network share

Page 45

AXIS P1405–E Network Camera

System Options

Storage

SD Card

NOTICE

To prevent corruption of recordings, the SD card should always be unmounted before it is ejected.

Note

For SD card recommendations see www.axis.com

Supports microSD cards with up to 64 GB of storage. For best recording performance, use a microSDHC or microSDXC card with speed class 10.

The following SD card file systems are supported:

ext4 — recommended due to its resilience against data loss if the card is ejected or if there is abrupt power loss. To access data stored on the card from the Windows operating system, a third-party ext4 driver or application is required.

vFAT — supported by most operating systems for personal computers.

The SD card is managed on the System Options > Storage page. Click SD Card to open Storage Management.

If the card’s status shows as failed, click Check disk to see if the problem can be found and then try Repair. This option is only available for SD cards with ext4. For SD cards with vFAT, use a card reader or computer to troubleshoot the card.

To avoid filling the card, it is recommended to remove recordings continuously. Under General Settings, select Remove recordings older than and select the number of days or weeks.

To stop writing to the card and protect recordings from being removed, select Lock under General Settings.

Network Share

Network share allows you to add network storage such as a NAS (network-attached storage). The NAS shall be dedicated for recordings and data from the Axis products connected to the network. For information about reference NAS devices, go to www.axis.com/products/cam_companion_software/supported.htm

Note

For NAS recommendations see www.axis.com

To add a network share:

1.Go to System Options > Storage.

2.Click Network Share.

3.Enter the IP address, DNS or Bonjour name to the host server in the Host field.

4.Enter the name of the share in the Share field. Sub folders cannot be used.

5.If required, select The share requires login and enter the user name and password.

6.Click Connect.

To clear all recordings and data from the Axis product’s folder on the designated share, click Clear under Storage Tools.

To avoid filling the share, it is recommended to remove recordings continuously. Under Recording Settings, select Remove recordings older than and select the number of days or weeks.

To stop writing to the share and protect recordings from being removed, select Lock under Recording Settings.

45

Image 45
Contents Axis P1405-E Network Camera Legal Considerations About this DocumentLiability Intellectual Property RightsLearn More SupportAxis P1405-E Network Camera Table of ContentsNetwork Connector Connectors and ButtonsHardware Overview SD Card SlotLED Indicators Control ButtonStatus LED Indication Access from a Browser Access the ProductAccess from the Internet Set the Root PasswordLive View Set Power Line FrequencyControls on the Live View Click Use HttpsAxis Media Control viewer toolbar Go to Setup EventsPTZ Controls Manual TriggerAxis P1405-E Network Camera How to Stream H.264 Media StreamsAxis Media Control AMC QuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamAxis P1405-E Network Camera Basic Setup Set Up the ProductVideo Set Up Video StreamsPixel Counter ImageClick Save to apply the new settings Stream Profiles264 Exposure Settings Camera SettingsImage Appearance White BalanceIris adjustment Set Shutter toDay/Night View Area Select an Aspect ratio and a Video stream resolutionOverlay Go to Video View AreaOverlay Image Use Overlay Text in an Action RuleGo to Video Overlay Image Focus & Zoom Privacy MaskGo to Events Action Rules Go to Video Focus & ZoomWhen satisfied, click Enable iris to enable the iris Default Viewer for Browsers Configure the Live ViewViewer Settings Browser Viewer DescriptionUser Defined Links Preset Positions PTZ Pan Tilt ZoomGuard Tour Advanced Control QueueControls Camera Tampering DetectorsMotion Detection Go to Detectors Camera TamperingMotion Detection Parameters Set Up Motion Detection WindowsAxis P1405-E Network Camera Go to Setup Applications Install ApplicationApplications Application LicensesAxis P1405-E Network Camera Events Set Up Action RulesFallback Action Go to Events Action Rules and click AddAdd Recipients Set Up Email RecipientsCreate Schedules Go to Events Recipients and click AddGo to Events Recurrences and click Add Set Up RecurrencesRecording List RecordingsContinuous Recording Go to Recordings ListLanguages Security System OptionsUsers IP Address FilterIeee CertificatesGo to System Options Security Ieee Go to Setup System Options Security Certificates Basic TCP/IP SettingsClick Install certificate and upload the certificate Date & TimeIPv6 Address Configuration IPv4 Address ConfigurationAssign IP Address Using ARP/Ping ARP/PingAxis Internet Dynamic DNS Service Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service requires IPv4 DNS ConfigurationHost Name Configuration NTP ConfigurationLink-Local IPv4 Address NAT traversal port mapping for IPv4FTP QoS Quality of ServiceUPnPTM UPnPTM can be disabled under System Options Network UPnPTMRTP/H.264 BonjourSD Card StorageNetwork Share To add a network shareSupport MaintenanceSupport Overview System OverviewPlain Config Reset to Factory Default SettingsScripting File UploadAxis P1405-E Network Camera Upgrade the Firmware TroubleshootingEmergency Recovery Procedure Check the FirmwareProblems setting the IP address Symptoms, Possible Causes and Remedial ActionsProduct cannot be accessed from a browser Product is accessible locally but not externallyVideo and image problems, general Problems with streaming H.264Video Camera Settings Key framesStorage disruption Storage and disk management problemsRe-mount the storage device Reformat the SD card and then click MountTechnical Specifications Power Function/group Specifications System ApplicationConnectors DimensionsPerformance Considerations ConnectorsM2.3