Axis Communications P1405-E user manual LED Indicators, Control Button, Status LED Indication

Page 6

AXIS P1405–E Network Camera

Hardware Overview

Control Button

For location of the control button, see Hardware Overview on page 5 .

The control button is used for:

•Resetting the product to factory default settings. See page 47.

•Connecting to an AXIS Video Hosting System service. See page 41. To connect, press and hold the button for about 3 seconds until the Status LED flashes green.

•Connecting to AXIS Internet Dynamic DNS Service. See page 41. To connect, press and hold the button for about 3 seconds.

LED Indicators

Note

•The Status LED can be configured to be unlit during normal operation. To configure, go to Setup > System Options > Ports & Devices > LED. See the online help for more information.

Status LED	Indication

Unlit	Connection and normal operation.

Green	Shows steady green for 10 seconds for normal operation after startup completed.

Amber	Steady during startup. Flashes during firmware upgrade.

Amber/Red	Flashes amber/red if network connection is unavailable or lost.

Red	Flashes red for firmware upgrade failure.

6

Image 6

Contents Axis P1405-E Network Camera Liability About this DocumentLegal Considerations Intellectual Property RightsSupport Learn MoreTable of Contents Axis P1405-E Network CameraHardware Overview Connectors and ButtonsNetwork Connector SD Card SlotLED Indicators Control ButtonStatus LED Indication Access from the Internet Access the ProductAccess from a Browser Set the Root PasswordControls on the Live View Set Power Line FrequencyLive View Click Use HttpsPTZ Controls Go to Setup EventsAxis Media Control viewer toolbar Manual TriggerAxis P1405-E Network Camera How to Stream H.264 Media StreamsAxis Media Control AMC Alternative Methods of Accessing the Video Stream QuickTimeTM. The following paths can be usedAxis P1405-E Network Camera Set Up the Product Basic SetupPixel Counter Set Up Video StreamsVideo ImageClick Save to apply the new settings Stream Profiles264 Image Appearance Camera SettingsExposure Settings White BalanceIris adjustment Set Shutter toDay/Night Overlay Select an Aspect ratio and a Video stream resolutionView Area Go to Video View AreaOverlay Image Use Overlay Text in an Action RuleGo to Video Overlay Image Go to Events Action Rules Privacy MaskFocus & Zoom Go to Video Focus & ZoomWhen satisfied, click Enable iris to enable the iris Viewer Settings Configure the Live ViewDefault Viewer for Browsers Browser Viewer DescriptionUser Defined Links Preset Positions PTZ Pan Tilt ZoomGuard Tour Advanced Control QueueControls Motion Detection DetectorsCamera Tampering Go to Detectors Camera TamperingSet Up Motion Detection Windows Motion Detection ParametersAxis P1405-E Network Camera Applications Install ApplicationGo to Setup Applications Application LicensesAxis P1405-E Network Camera Fallback Action Set Up Action RulesEvents Go to Events Action Rules and click AddCreate Schedules Set Up Email RecipientsAdd Recipients Go to Events Recipients and click AddSet Up Recurrences Go to Events Recurrences and click AddContinuous Recording RecordingsRecording List Go to Recordings ListLanguages Users System OptionsSecurity IP Address FilterIeee CertificatesGo to System Options Security Ieee Click Install certificate and upload the certificate Basic TCP/IP SettingsGo to Setup System Options Security Certificates Date & TimeAssign IP Address Using ARP/Ping IPv4 Address ConfigurationIPv6 Address Configuration ARP/PingAxis Internet Dynamic DNS Service requires IPv4 Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service DNS ConfigurationLink-Local IPv4 Address NTP ConfigurationHost Name Configuration NAT traversal port mapping for IPv4QoS Quality of Service FTPRTP/H.264 UPnPTM can be disabled under System Options Network UPnPTMUPnPTM BonjourNetwork Share StorageSD Card To add a network shareSupport Overview MaintenanceSupport System OverviewScripting Reset to Factory Default SettingsPlain Config File UploadAxis P1405-E Network Camera Emergency Recovery Procedure TroubleshootingUpgrade the Firmware Check the FirmwareProduct cannot be accessed from a browser Symptoms, Possible Causes and Remedial ActionsProblems setting the IP address Product is accessible locally but not externallyVideo Camera Settings Problems with streaming H.264Video and image problems, general Key framesRe-mount the storage device Storage and disk management problemsStorage disruption Reformat the SD card and then click MountTechnical Specifications Connectors Function/group Specifications System ApplicationPower DimensionsConnectors Performance ConsiderationsM2.3