AXIS P1405–LE Network Camera
Events
To use more than one trigger for the action rule, select Additional conditions and click Add to add additional triggers. When using additional conditions, all conditions must be met to trigger the action.
To prevent an action from being triggered repeatedly, a Wait at least time can be set. Enter the time in hours, minutes and seconds, during which the trigger should be ignored before the action rule can be activated again.
The recording Duration of some actions can be set to include time immediately before and after the event. Select
For more information, see the online help .
Fallback Action
A fallback action is started if the primary action cannot be started, for example if connection to a recipient cannot be established.
Fallback actions are typically used to send email notifications on failed actions or to upload images to a secondary recipient.
Recipients
Recipients receive media files and notification messages. The following recipients are available:
Recipient | Use with action |
|
|
Email1 | Send Images |
| Send Notification |
| Send Video Clip |
|
|
FTP | Send Images |
| Send Video Clip |
|
|
HTTP | Send Images |
| Send Notification |
| Send Video Clip |
|
|
HTTPS | Send Images |
| Send Notification |
| Send Video Clip |
|
|
Network Share2 | Send Images |
| Send Video Clip |
|
|
TCP | Send Notification |
|
|
1.Some email providers have security filters that prevent users from receiving or viewing large amount of attachments, from receiving scheduled emails and similar. Check the email provider’s security policy to avoid delivery problems and locked email accounts.
2.A network share can also be used as a storage device for recorded video. Go System Options > Storage to configure a network share before setting up a continuous recording or an action rule to record video. See Storage on page 46 for more information about storage devices.
To add a recipient:
1.Go to Events > Recipients and click Add.
2.Enter a descriptive name.
3.Select a recipient Type.
34