Axis Communications P1405-LE user manual Set Power Line Frequency, Controls on the Live View

Page 8

AXIS P1405–LE Network Camera

Accessing the Product

The default administrator user name root is permanent and cannot be deleted. If the password for root is lost, the product must be reset to the factory default settings. See Reset to Factory Default Settings on page 49.

To set the password via a standard HTTP connection, enter it directly in the dialog.

To set the password via an encrypted HTTPS connection, follow these steps:

1.Click Use HTTPS.

A temporary certificate (valid for one year) is created, enabling encryption of all traffic to and from the product, and the password can now be set securely.

2.Enter a password and then re-enter it to confirm the spelling.

3.Click OK. The password has now been configured.

Set Power Line Frequency

Power line frequency is set the first time the Axis product is accessed and can only be changed from Plain Config (see page 49) or by resetting the product to factory default.

Select the power line frequency (50 Hz or 60 Hz) used at the location of the Axis product. Selecting the wrong frequency may cause image flicker if the product is used in fluorescent light environments.

When using 50 Hz, the maximum frame rate is limited to 25 fps.

Note

Power line frequency varies depending on geographic region. The Americas usually use 60 Hz, whereas most other parts of the world use 50 Hz. Local variations could apply. Always check with the local authorities.

The Live View Page

The controls and layout of the Live View page may have been customized to meet specific installation requirements and user preferences. Consequently, some of the examples and functions featured here may differ from those displayed in your own Live View page. The following provides an overview of each available control.

Controls on the Live View Page

Click the View size buttons to show the image in full size (right button) or to scale down the image to fit the browser window (left button).

Select a stream profile for the Live View page from the Stream Profile drop-down list. For information about how to configure stream profiles, see page 16.

The Manual Trigger button is used to trigger an action rule from the Live View page. For information about how to configure and enable the button, see Manual Trigger on page 9 .

Click Snapshot to save a snapshot of the video image. This button is primarily intended for use when the

AXIS Media Control viewer toolbar is not available. Enable this button from Live View Config > Action Buttons.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Axis P1405-LE Network Camera About this Document Legal ConsiderationsLiability Intellectual Property RightsSupport Learn MoreTable of Contents Axis P1405-LE Network Camera Connectors and Buttons Network Connector Hardware Overview SD Card SlotLED Indicators Color IndicationAccessing the Product Access from a BrowserAccess from the Internet Set the Root PasswordSet Power Line Frequency Live ViewControls on the Live View Click Use HttpsGo to Setup Events Axis Media Control viewer toolbarPTZ Controls Manual TriggerAxis P1405-LE Network Camera Axis Media Control AMC How to Stream H.264Media Streams Alternative Methods of Accessing the Video Stream Axis P1405-LE Network Camera Setting Up the Product Basic SetupVideo Video StreamPixel Counter ImageStream Profiles 264Camera Settings Exposure SettingsImage Appearance White BalanceDay/Night Iris adjustmentBuilt-in IR Illuminations LEDs Select an Aspect ratio and a Video stream resolution View AreaOverlay Go to Video View AreaGo to Video Overlay Image Using Overlay Text in an Action RuleOverlay Image Privacy Mask Focus & ZoomGo to Events Action Rules Go to Video Focus & ZoomAxis P1405-LE Network Camera Live View Config Default Viewer for BrowsersViewer Settings Browser Viewer DescriptionUser Defined Links Light ButtonsPreset Positions Go to PTZ Preset PositionsPTZ Pan Tilt Zoom Guard TourControls AdvancedControl Queue Detectors Camera TamperingMotion Detection Go to Detectors Camera TamperingSet Up Motion Detection Windows Motion Detection ParametersAxis P1405-LE Network Camera Install Application Go to Setup ApplicationsApplications Application LicensesAxis P1405-LE Network Camera Events Setting Up an Action Rule TimePTZ Control Go to Events Action Rules and click AddRecipients Fallback ActionRecipient Use with action Go to Events Recipients and click AddSetting Up an Email Recipient SchedulesRecurrences Go to Events Schedules and click AddAxis P1405-LE Network Camera Recordings Recording ListContinuous Recording Go to Recordings ListLanguages System Options SecurityUsers IP Address FilterGo to System Options Security Ieee IeeeCertificates Basic TCP/IP Settings Go to Setup System Options Security CertificatesDate & Time NetworkIPv4 Address Configuration IPv6 Address ConfigurationAssign IP Address Using ARP/Ping ARP/PingAdvanced TCP/IP Settings Axis Internet Dynamic DNS ServiceDNS Configuration Axis Video Hosting System AvhsNTP Configuration Host Name ConfigurationLink-Local IPv4 Address NAT traversal port mapping for IPv4QoS Quality of Service FTPStorage UPnPTMRTP/H.264 BonjourGo to System Options Storage Click Network Share Network ShareGo to System Options Storage and click SD Card Maintenance SupportSupport Overview System OverviewReset to Factory Default Settings Plain ConfigScripting File UploadAxis P1405-LE Network Camera Troubleshooting Emergency Recovery ProcedureChecking the Firmware Upgrading the FirmwareSymptoms, Possible Causes and Remedial Actions Problems setting the IP addressProduct cannot be accessed from a browser Product is accessible locally but not externallyProblems with streaming H.264 Video and image problems, generalVideo Camera Settings Key framesStorage and disk management problems Storage disruptionTechnical Specifications Function/group Specifications System Application PowerConnectors DimensionsConnectors Performance ConsiderationsM1.3
Top Page Image Contents