Axis Communications P1425-E user manual Date & Time, Network, Basic TCP/IP Settings

Page 40

AXIS P1425-E Network Camera

System Options

A Server/Client certificate can be self-signed or issued by a Certificate Authority (CA). A self-signed certificate offers limited protection and can be used before a CA-issued certificate has been obtained.

To install a self-signed certificate:

1.Go to Setup > System Options > Security > Certificates.

2.Click Create self-signed certificate and provide the requested information. To create and install a CA-signed certificate:

1.Create a self-signed certificate as described above.

2.Go to Setup > System Options > Security > Certificates.

3.Click Create certificate signing request and provide the requested information.

4.Copy the PEM-formatted request and send to the CA of your choice.

5.When the signed certificate is returned, click Install certificate and upload the certificate.

Server/Client certificates can be installed as Certificate from signing request or as Certificate and private key. Select Certificate and private key if the private key is to be upload as a separate file or if the certificate is in PKCS#12 format.

The Axis product is shipped with several preinstalled CA certificates. If required, additional CA certificates can be installed:

1.Go to Setup > System Options > Security > Certificates.

2.Click Install certificate and upload the certificate.

Date & Time

The Axis product’s date and time settings are configured under System Options > Date & Time.

Current Server Time displays the current date and time (24h clock). The time can be displayed in 12h clock in the text overlay (see below).

To change the date and time settings, select the preferred Time mode under New Server Time:

•Synchronize with computer time – Sets date and time according to the computer’s clock. With this option, date and time are set once and will not be updated automatically.

•Synchronize with NTP Server – Obtains date and time from an NTP server. With this option, date and time settings are updated continuously. For information on NTP settings, see NTP Configuration on page 43.

If using a host name for the NTP server, a DNS server must be configured. See DNS Configuration on page 42.

•Set manually – Allows you to manually set date and time.

If using an NTP server, select your Time zone from the drop-down list. If required, check Automatically adjust for daylight saving time changes.

The Date & Time Format Used in Images is the date and time format displayed as a text overlay in the video stream. Use the

predefined formats or see File Naming & Date/Time Formats in the online help for information on how to create custom date and time formats. To include date and time in the overlay text, go to Video and select Include date and Include time.

Network

Basic TCP/IP Settings

The Axis product supports IP version 4 and IP version 6. Both versions can be enabled simultaneously, and at least one version must always be enabled.

40

Page 39 Page 41
Image 40
Page 39 Page 41
Contents Axis P1425-E Network Camera About this Document Legal ConsiderationsLiability Intellectual Property RightsSupport Learn MoreTable of Contents Axis P1425-E Network CameraPerformance Considerations Connectors and Buttons Network ConnectorConnector Hardware OverviewLED Indicators SD Card SlotControl Button Status LED IndicationAccess the Product Access from a BrowserAccess from the Internet Set the Root PasswordSet Power Line Frequency Live ViewControls on the Live View Click Use HttpsGo to Setup Events Axis Media Control viewer toolbarPTZ Controls Manual TriggerAxis P1425-E Network Camera Media Streams How to Stream H.264Axis Media Control AMC Alternative Methods of Accessing the Video Stream QuickTimeTM. The following paths can be usedAxis P1425-E Network Camera Set Up the Product Basic SetupSet Up Video Streams VideoPixel Counter ImageStream Profiles Click Save to apply the new settings264 Camera Settings Exposure SettingsImage Appearance White BalanceSet Shutter to Iris adjustmentDay/Night Select an Aspect ratio and a Video stream resolution View AreaOverlay Go to Video View AreaUse Overlay Text in an Action Rule Overlay ImageGo to Video Overlay Image Privacy Mask Focus & ZoomGo to Events Action Rules Go to Video Focus & ZoomWhen satisfied, click Enable iris to enable the iris Configure the Live View Default Viewer for BrowsersViewer Settings Browser Viewer DescriptionGo to Setup Live View Config User Defined LinksOutput Buttons For more information about I/O ports, see I/O Ports onPreset Positions PTZ Pan Tilt ZoomGuard Tour AdvancedControl Queue Detectors Camera TamperingMotion Detection Go to Detectors Camera TamperingSet Up Motion Detection Windows Motion Detection ParametersAxis P1425-E Network Camera Install Application Go to Setup ApplicationsApplications Application LicensesAxis P1425-E Network Camera Set Up Action Rules EventsFallback Action Go to Events Action Rules and click AddSet Up Email Recipients Add RecipientsCreate Schedules Go to Events Recipients and click AddSet Up Recurrences Go to Events Recurrences and click AddRecordings Recording ListContinuous Recording Go to Recordings ListLanguages System Options SecurityUsers IP Address FilterCertificates IeeeGo to System Options Security Ieee Basic TCP/IP Settings Go to Setup System Options Security CertificatesClick Install certificate and upload the certificate Date & TimeIPv4 Address Configuration IPv6 Address ConfigurationAssign IP Address Using ARP/Ping ARP/PingAdvanced TCP/IP Settings Axis Internet Dynamic DNS ServiceAxis Internet Dynamic DNS Service requires IPv4 DNS ConfigurationNTP Configuration Host Name ConfigurationLink-Local IPv4 Address NAT traversal port mapping for IPv4QoS Quality of Service FTPUPnPTM can be disabled under System Options Network UPnPTM UPnPTMRTP/H.264 BonjourStorage SD CardNetwork Share To add a network sharePorts & Devices MaintenanceSupport System Overview Logs & ReportsScripting File UploadReset to Factory Default Settings Plain ConfigTroubleshooting Upgrade the FirmwareEmergency Recovery Procedure Check the FirmwareSymptoms, Possible Causes and Remedial Actions Problems setting the IP addressProduct cannot be accessed from a browser Product is accessible locally but not externallyProblems with streaming H.264 Video and image problems, generalVideo Camera Settings Key framesStorage and disk management problems Storage disruptionRe-mount the storage device Reformat the SD card and then click MountTechnical Specifications Function/group Specifications System Application PowerConnectors DimensionsConnectors Performance Considerations M2.3
Top Page Image Contents