Axis Communications P1425-E user manual Reset to Factory Default Settings, Plain Config

Page 49

AXIS P1425-E Network Camera

System Options

Plain Config

Plain Config is for advanced users with experience of Axis product configuration. Most parameters can be set and modified from this page.

To open Plain Config, go to System Options > Advanced > Plain Config. Axis Support does not provide assistance.

Reset to Factory Default Settings

Important

Reset to factory default should be used with caution. A reset to factory default will reset all settings, including the IP address, to the factory default values.

Note

The installation and management software tools are available on the CD supplied with the product and from the support pages on www.axis.com/techsup

To reset the product to the factory default settings:

1.Disconnect power from the product.

2.Press and hold the control button and reconnect power. See Hardware Overview on page 6 .

3.Keep the control button pressed for about 15–30 seconds until the status LED indicator flashes amber.

4.Release the control button. The process is complete when the status LED indicator turns green. The product has been reset to the factory default settings. If no DHCP server is available on the network, the default IP address is 192.168.0.90

5.Using the installation and management software tools, assign an IP address, set the password, and access the video stream. It is also possible to reset parameters to factory default via the web interface. Go to Setup > System Options > Maintenance.

49

Image 49

Contents Axis P1425-E Network Camera Legal Considerations About this DocumentLiability Intellectual Property RightsLearn More SupportAxis P1425-E Network Camera Table of ContentsPerformance Considerations Network Connector Connectors and ButtonsConnector Hardware OverviewSD Card Slot LED IndicatorsControl Button Status LED IndicationAccess from a Browser Access the ProductAccess from the Internet Set the Root PasswordLive View Set Power Line FrequencyControls on the Live View Click Use HttpsAxis Media Control viewer toolbar Go to Setup EventsPTZ Controls Manual TriggerAxis P1425-E Network Camera Media Streams How to Stream H.264Axis Media Control AMC QuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamAxis P1425-E Network Camera Basic Setup Set Up the ProductVideo Set Up Video StreamsPixel Counter ImageStream Profiles Click Save to apply the new settings264 Exposure Settings Camera SettingsImage Appearance White BalanceSet Shutter to Iris adjustmentDay/Night View Area Select an Aspect ratio and a Video stream resolutionOverlay Go to Video View AreaUse Overlay Text in an Action Rule Overlay ImageGo to Video Overlay Image Focus & Zoom Privacy MaskGo to Events Action Rules Go to Video Focus & ZoomWhen satisfied, click Enable iris to enable the iris Default Viewer for Browsers Configure the Live ViewViewer Settings Browser Viewer DescriptionUser Defined Links Go to Setup Live View ConfigOutput Buttons For more information about I/O ports, see I/O Ports onPTZ Pan Tilt Zoom Preset PositionsGuard Tour AdvancedControl Queue Camera Tampering DetectorsMotion Detection Go to Detectors Camera TamperingMotion Detection Parameters Set Up Motion Detection WindowsAxis P1425-E Network Camera Go to Setup Applications Install ApplicationApplications Application LicensesAxis P1425-E Network Camera Events Set Up Action RulesFallback Action Go to Events Action Rules and click AddAdd Recipients Set Up Email RecipientsCreate Schedules Go to Events Recipients and click AddGo to Events Recurrences and click Add Set Up RecurrencesRecording List RecordingsContinuous Recording Go to Recordings ListLanguages Security System OptionsUsers IP Address FilterCertificates IeeeGo to System Options Security Ieee Go to Setup System Options Security Certificates Basic TCP/IP SettingsClick Install certificate and upload the certificate Date & TimeIPv6 Address Configuration IPv4 Address ConfigurationAssign IP Address Using ARP/Ping ARP/PingAxis Internet Dynamic DNS Service Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service requires IPv4 DNS ConfigurationHost Name Configuration NTP ConfigurationLink-Local IPv4 Address NAT traversal port mapping for IPv4FTP QoS Quality of ServiceUPnPTM UPnPTM can be disabled under System Options Network UPnPTMRTP/H.264 BonjourSD Card StorageNetwork Share To add a network sharePorts & Devices MaintenanceSupport Logs & Reports System OverviewScripting File UploadPlain Config Reset to Factory Default SettingsUpgrade the Firmware TroubleshootingEmergency Recovery Procedure Check the FirmwareProblems setting the IP address Symptoms, Possible Causes and Remedial ActionsProduct cannot be accessed from a browser Product is accessible locally but not externallyVideo and image problems, general Problems with streaming H.264Video Camera Settings Key framesStorage disruption Storage and disk management problemsRe-mount the storage device Reformat the SD card and then click MountTechnical Specifications Power Function/group Specifications System ApplicationConnectors DimensionsConnectors Performance Considerations M2.3