Bosch Appliances BasicDome Series instruction manual Saving a scene Preset, Preset Tour

Indoor Pendant & In-ceiling Models User Manual On-Screen Programming EN UM3

1ON-SCREEN

PROGRAMMING

The BasicDome software offers user-friendly on-screen programming. A few common commands are shown below. At the end of this section is a complete list of user commands for your reference.

1.1Saving a scene (Preset)

The BasicDome allows up to 99 scenes to be saved and recalled instantly. A saved scene is called a Preset. When a Preset is saved, the position, zoom, and most camera settings are stored.

SET-100-ENTER displays the Preset menu (see

FIGURE 1).

Figure 2: Naming a Screen (Preset)

1.2 Preset Tour

Once Presets are stored, the BasicDome can cycle through all Presets or selected Presets. This is called a Preset tour. To include or remove presets on a tour, type SET-900-ENTER. This displays the current presets and indicates if they are on the tour. Follow the on-screen instructions to include/remove Presets from the tour (Note: Presets removed from the tour can still be accessed manually). Type ON-8-ENTER to activate the preset tour. To change the time duration between presets, type ON-15-ENTER and follow the on-screen instructions.

Figure 1: Naming a Scene (Preset)

Menu options are store, delete, name, or edit. Up to 99 scenes can be saved, and the system automatically selects the next available number. When a Preset is saved, it can be named via the joystick, FOCUS, and IRIS (see FIGURE 2). The name can be up to 16 characters long. This Preset can later be viewed using the SHOT-#-ENTER command, where

# is 1-99.

Figure 3: Preset Tour Menu

Bosch Security Systems 10 December 2003