Bosch Appliances VIP X1600 XF Maintenance and Upgrades, Testing the Network Connection, Repairs

Page 19

VIP X1600 XFMaintenance and Upgrades en 19

5

Maintenance and Upgrades

5.1

Testing the Network Connection

You can use the ping command to check the connection between two IP addresses. This allows you to test whether a unit in the network is active.

1.Open the DOS command prompt.

2.Type ping followed by the IP address of the unit.

If the unit is found, the response appears as Reply from ... followed by the number of bytes sent and the transmission time in milliseconds. If not, the unit cannot be accessed over the network. This might be because:

The VIP X1600 XF is not correctly connected to the network. Check the cable connections in this case.

The module is not correctly integrated into the network. Check the IP address, subnet mask and gateway address.

5.2

Unit Reset

 

You can use the Factory Reset button to individually restore each module to its original

 

settings. It is not possible to reset the VIP X1600 XF base.

5.3

Repairs

 

 

 

 

 

 

 

 

 

 

 

 

!

CAUTION!

Do not change any components in the modules or the VIP X1600 XF base. The unit does not

contain any user-serviceable parts.

 

 

 

 

 

 

 

 

 

 

 

 

 

Ensure that all maintenance or repair work is carried out only by qualified personnel

 

(electrical engineers or network technology specialists). In case of doubt, contact your

 

dealer's technical service center.

5.4

Transfer and Disposal

 

The VIP X1600 XF, the VIP X1600 XF base or a module should only be passed on together with

 

this Installation and Operating Manual.

 

Your Bosch product is designed and manufactured with high-quality materials and

 

components which can be recycled and reused.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

This symbol means that electrical and electronic equipment, at their end-of-life, should be disposed of separately from your household waste.

In the European Union, there are separate collection systems for used electrical and electronic products. Please dispose of this equipment at your local community waste collection/ recycling center.

Bosch Security Systems

Installation and Operating Manual

F.01U.082.088 V3.5 2008.05

Image 19
Contents VIP X1600 XF Page Table of Contents En Table of Contents Intended Use PrefaceAbout this Manual Conventions in this ManualRating Plate EU DirectivesElectric Shock Hazard Safety InformationInstallation and Operation Maintenance and RepairEn Safety Information Scope of Delivery System Requirements for SetupConfiguration and Operation Product DescriptionNetwork Interfaces Network Video Server HousingRedundant Power Supply Overview of FunctionsSFP LED Connections and DisplaysEn Product Description Installing Modules InstallationPreparations Installing and Connecting the VIP X1600 XF Installing in a Switch CabinetPreparations Page Direct iSCSI Connection En InstallationConnections NetworkPower Supply Power On/Power OffEn Installation Repairs Maintenance and UpgradesTesting the Network Connection Unit ResetEn Maintenance and Upgrades Appendix TroubleshootingLEDs En Appendix VIP X1600 XF Base SpecificationsEn Specifications Page Bosch Security Systems