Bosch Appliances VIP X1600 XF Connections, Network, Direct iSCSI Connection, En Installation

16 en Installation VIP X1600 XF

4.4 Connections

4.4.1Network

You can connect the VIP X1600 XF to a 10/100/1000 Base-T network using a standard UTP category 5 cable with RJ45 plugs. The Ethernet interfaces can be used to create one or more redundant connections to the network.

i	NOTICE!
	You cannot create a connection to a second network.

1.Connect the VIP X1600 XF to the network via the ETH1, ETH2 or ETH3 socket.

2.Connect the VIP X1600 XF to a redundant switch or hub on the same network via a free ETH1, ETH2 or ETH3 socket.

4.4.2Direct iSCSI Connection

You can connect the VIP X1600 XF directly to an iSCSI system via a free ETH1, ETH2 or ETH3 interface. This connection is an alternative to using the Ethernet interfaces as a redundant network connection. Use a UTP category 5 network cable with RJ45 plugs for a direct connection to an iSCSI system.

NOTICE!

i You can obtain a list of compatible iSCSI systems from your supplier or directly from Bosch Security Systems. This list is constantly being updated and extended.

F.01U.082.088 V3.5 2008.05 Installation and Operating Manual Bosch Security Systems