Axis Communications M3203 Performance Considerations, Function/group Specifications Video

Page 53

AXIS M3203 Network Camera

Technical Specifications

Function/group

Item

Specifications

 

 

 

 

Video

AXIS Camera Companion (included), AXIS Camera Station and video management

 

management

software from Axis’ Application Development Partners (not included). See

 

software (not

www.axis.com/products/video/software

 

included)

 

 

Optional

AXIS P8221 Network I/O Audio Module

 

accessories

Casings with smoked transparent cover

 

 

Black casing

 

 

Various mounting kits

 

 

 

Performance Considerations

When setting up your system, it is important to consider how various settings and situations will affect performance. Some factors affect the amount of bandwidth (the bit rate) required, others can affect the frame rate, and some affect both. If the load on the CPU reaches its maximum, this will also affect the frame rate.

The following factors are among the most important to consider:

High image resolution and/or lower compression levels result in images containing more data. Bandwidth affected.

Access by large numbers of Motion JPEG and/or unicast H.264 clients. Bandwidth affected.

Simultaneous viewing of different streams (resolution, compression) by different clients. Effect on frame rate and bandwidth.

Accessing Motion JPEG and H.264 video streams simultaneously. Frame rate and bandwidth affected.

Heavy usage of event settings affect the product’s CPU load. Frame rate affected.

Heavy network utilization due to poor infrastructure. Bandwidth affected.

Viewing on poorly performing client computers lowers perceived performance. Frame rate affected.

53

Image 53
Contents Axis M3203 Network Camera Legal Considerations About this DocumentLiability Intellectual Property RightsLearn More SupportAxis M3203 Network Camera Table of ContentsNetwork Connector Connectors and ButtonsFor technical specifications, see RJ45 Ethernet connector with Power over Ethernet PoEColor Indication LED IndicatorsControl Button Access from a Browser Accessing the ProductAccess from the Internet Set the Root PasswordClick Create self-signed certificate Set Power Line FrequencyLive View Controls on the Live View Go to Setup EventsAxis Media Control viewer toolbar Manual TriggerPTZ Controls Axis Media Control AMC How to Stream H.264Media Streams QuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamAxis M3203 Network Camera Basic Setup Setting Up the ProductVideo Stream VideoPixel Counter ImageClick Save to apply the new settings Camera SettingsStream Profiles 264To configure the view area Exposure SettingsView Area Image AppearanceOverlay Image OverlayGo to Video Video Stream and select the Image tab Go to Video Overlay ImageGo to Events Action Rules Using Overlay Text in an Action RulePrivacy Mask Axis M3203 Network Camera Default Viewer for Browsers Live View ConfigViewer Settings Browser Viewer DescriptionUser Defined Links Go to PTZ Preset Positions Preset PositionsPTZ Pan Tilt Zoom Guard TourControls AdvancedCamera Tampering DetectorsMotion Detection Go to Detectors Camera TamperingMotion Detection Parameters Set Up Motion Detection WindowsGo to Detectors Motion Detection Parameter Object Size History Sensitivity DescriptionMedium level 50% Default valuesLow level 0% Recommended valuesGo to Setup Applications Install ApplicationApplications Application LicensesAxis M3203 Network Camera Events Go to Events Action Rules and click Add Setting Up an Action RuleRecipients Go to Events Recipients and click Add Setting Up an Email RecipientRecipient Use with action Recurrences SchedulesTo create a new schedule Go to Events Schedules and click AddRecording List RecordingsContinuous Recording Go to Recordings ListLanguages Security System OptionsUsers IP Address FilterGo to System Options Security Ieee IeeeCertificates Go to Setup System Options Security Certificates Basic TCP/IP SettingsDate & Time NetworkIPv6 Address Configuration IPv4 Address ConfigurationAssign IP Address Using ARP/Ping ARP/PingAxis Internet Dynamic DNS Service Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service requires IPv4 DNS ConfigurationHost Name Configuration NTP ConfigurationLink-Local IPv4 Address NAT traversal port mapping for IPv4Smtp email QoS Quality of ServiceUPnPTM UPnPTM can be disabled under System Options Network UPnPTMRTP/H.264 BonjourStorage MaintenanceNetwork Share To add a network shareSupport Overview SupportSystem Overview Logs & ReportsFile Upload Reset to Factory Default SettingsPlain Config Firmware To upgrade the product’s firmware TroubleshootingChecking the Firmware Upgrading the FirmwareSymptoms, Possible Causes and Remedial Actions Emergency Recovery ProcedureProblems setting the IP address Product cannot be accessed from a browserBasic Product is accessible locally but not externallyProblems with streaming H.264 Video and image problems, general Status and Network indicator LEDs are flashing red rapidlyVideo Camera Settings Storage and disk management problemsTechnical Specifications Maintenance Installation aids Function/group Specifications System ApplicationMemory Power ConnectorsPerformance Considerations Function/group Specifications VideoM2.18
Related manuals
Manual 49 pages 16.78 Kb

M3203 specifications

Axis Communications is renowned for its innovative approach to network video technology, and its M3200 series is a testament to this legacy, comprising models such as the M3204-V, M3203-V, M3203, and M3204. These cameras are designed to meet the diverse needs of surveillance applications while maintaining high standards of video quality and performance.

One of the standout features of the M3200 series is its compact and discreet design. The cameras are ideal for indoor use in environments where aesthetics are vital, such as retail stores, hotels, and offices. Their unobtrusive form factor allows them to blend seamlessly into various settings while providing comprehensive monitoring capabilities.

The M3204-V and M3204 models support two-way audio, allowing users to not only monitor but also communicate through the camera. This feature is particularly useful for interactive communication in scenarios like customer service or security personnel directions. Additionally, it supports an audio input for connecting external microphones, which enhances situational awareness.

All models in the series are equipped with Axis’ Lightfinder technology, enabling them to capture high-quality video in low-light conditions. This technology ensures that users receive clear and detailed images even in challenging lighting environments. Furthermore, the M3200 series offers Wide Dynamic Range (WDR) functionality, which helps to enhance the visibility of both dark and bright areas in a scene simultaneously.

With support for1080p resolution at up to 30 frames per second, the M3200 series delivers crisp and detailed video, making identification easier. The cameras also feature H.264 compression technology, which helps optimize bandwidth and storage requirements without sacrificing quality.

For added versatility, the M3200 series includes a wide variety of mounting options, making it easy to install the cameras in various settings. They also come equipped with an IP51 rating for dust and drip protection, ensuring reliable operation even in less-than-ideal conditions.

Moreover, the integration of Axis' Zipstream technology efficiently compresses video, thereby decreasing storage and bandwidth usage while retaining critical forensic details. This is particularly beneficial for long-term archiving of footage without quality loss.

In conclusion, Axis Communications M3200 series models such as the M3204-V, M3203-V, M3203, and M3204 offer advanced features tailored for effective surveillance. The combination of compact design, enhanced low-light capabilities, flexible installation options, and superior image quality positions the M3200 series as a top choice for those seeking reliable and efficient security solutions.