Axis Communications AXIS Q6045 Mk II PTZ Events, Set Up Action Rules, Triggers, Detectors

Page 41

AXIS Q6045 Mk II PTZ Dome Network Camera

Events

Events

The Event pages allow you to configure the Axis product to perform actions when different events occur. For example, the product can start a recording or send an email notification when motion is detected. The set of conditions that defines how and when the action is triggered is called an action rule.

Set Up Action Rules

An action rule defines the conditions that must be met for the product to perform an action, for example record video or send an email notification. If multiple conditions are defined, all of them must be met to trigger the action.

For more information about available triggers and actions, see Triggers on page 41 and Actions on page 43.

The following example describes how to set up an action rule to record video to a network share if there is movement in the camera’s field of view.

Set up motion detection and add a network share:

1.Go to Detectors > Motion Detection and configure a motion detection window. See page 34

2.Go to System Options > Storage and set up the network share. See page 58.

Set up the action rule:

1.Go to Events > Action Rules and click Add.

2.Select Enable rule and enter a descriptive name for the rule.

3.Select Detectors from the Trigger drop-down list.

4.Select Motion Detection from the drop-down list. Select the motion detection window to use.

5.Optionally, select a Schedule and Additional conditions. See below.

6.Under Actions, select Record Video from the Type drop-down list.

7.Select a Stream profile and configure the Duration settings as described below.

8.Select Network Share from the Storage drop-down list.

To use more than one trigger for the action rule, select Additional conditions and click Add to add additional triggers. When using additional conditions, all conditions must be met to trigger the action.

To prevent an action from being triggered repeatedly, a Wait at least time can be set. Enter the time in hours, minutes and seconds, during which the trigger should be ignored before the action rule can be activated again.

The recording Duration of some actions can be set to include time immediately before and after the event. Select Pre-trigger time and/or Post-trigger time and enter the number of seconds. When While the rule is active is enabled and the action is triggered again during the post-trigger time, the recording time will be extended with another post-trigger time period.

For more information, see the online help .

Triggers

Available action rule triggers and conditions include:

•Applications – Use installed applications to trigger the rule. See Applications on page 39.

•Detectors

-Audio Detection – Trigger the rule when audio is detected. See Audio Detection on page 38.

41

Page 40 Page 42
Image 41
Page 40 Page 42
Contents Axis Q6045 Mk II PTZ Dome Network Camera Legal Considerations About this DocumentLiability Intellectual Property RightsLearn More SupportAxis Q6045 Mk II PTZ Dome Network Camera Table of ContentsConnectors Performance Considerations Reset to Factory Default SettingsNetwork Connector Connectors and ButtonsFor technical specifications, see Hardware OverviewPower Button Multi-connectorSD Card Slot Control ButtonMidspan LED Indicators LED IndicatorsGreen Steady when AC power input connected Color IndicationAccess from a Browser Access the ProductAccess from the Internet Set the Root PasswordClick Use Https Live ViewControls on the Live View Axis Media Control viewer toolbar Go to Setup EventsManual Trigger To show the manual trigger buttons in the Live ViewSpeaker button Click to turn the speakers on or off PTZ ControlsAxis Q6045 Mk II PTZ Dome Network Camera Axis Media Control AMC How to Stream H.264Media Streams QuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamJava applet supports simplex audio with G.711 encoding Access Audio StreamsBasic Setup Set Up the ProductVideo Stream Video and AudioPixel Counter Image264 Stream ProfilesCapture Mode Camera SettingsGo to Setup Video & Audio Camera Settings Image AppearanceImage Settings Exposure SettingsWide Dynamic Range WDR 1 contrastOverlay Image OverlayGo to Video & Audio Video Stream and select the Image tab Go to Video & Audio Overlay ImageGo to Events Action Rules Use Overlay Text in an Action RulePrivacy Mask Audio SettingsAudio Modes Audio InputAudio Output Audio ClipsDefault Viewer for Browsers Configure the Live ViewViewer Settings Browser Viewer DescriptionOutput Buttons Go to Setup Live View ConfigUser Defined Links PTZ Pan Tilt Zoom Preset PositionsGatekeeper ConfigurationAutotracking Exclude AreasTo add a guard tour Guard TourTour Recording Advanced Osdi ZonesLimits To add a recorded tourControls Control Queue Operator Same as administrator but with lower priorityDetectors Set Up Motion Detection WindowsShock Detection Motion DetectionObject Removed Basic Video AnalyticsEnter/Exit Detector Object Counter Fence DetectorBe activated See the online help for more information Audio DetectionObservations Go to Detectors Audio DetectionGo to Setup Applications Install ApplicationApplications Application LicensesAxis Q6045 Mk II PTZ Dome Network Camera Events Set Up Action RulesTriggers Go to Events Action Rules and click AddHardware Input SignalStorage SystemActions Add RecipientsRecipient Types PTZ ControlRecipient Use with action Set Up Email RecipientsCreate Schedules Set Up RecurrencesTo create a new schedule Go to Events Schedules and click AddRecording List RecordingsContinuous Recording Go to Recordings ListClick Save to save and start the recording Languages Security System OptionsUsers IP Address FilterGo to System Options Security Ieee IeeeCertificates Go to Setup System Options Security Certificates To install a self-signed certificateClick Install certificate and upload the certificate Date & TimeNetwork Basic TCP/IP SettingsAxis Internet Dynamic DNS Service Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service requires IPv4 DNS ConfigurationHost Name Configuration NTP ConfigurationLink-Local IPv4 Address NAT traversal port mapping for IPv4FTP QoS Quality of ServiceUPnPTM UPnPTM can be disabled under System Options Network UPnPTMRTP/H.264 BonjourSD Card StorageMount and Unmount SD Card Format SD CardNetwork Share Ports & DevicesPorts Port StatusSupport MaintenanceSupport Overview System OverviewPlain Config Reset to Factory Default SettingsScripting File UploadAxis Q6045 Mk II PTZ Dome Network Camera Cable provides the following connectors Multi-Connector Cable sold separatelyFunction Pin Specifications To max 40 V DC, open drain, 100 mAConnector Upgrade the Firmware TroubleshootingEmergency Recovery Procedure Check the FirmwareProblems setting the IP address Symptoms, Possible Causes and Remedial ActionsProduct cannot be accessed from a browser Product is accessible locally but not externallyVideo and image problems, general Problems with streaming H.264Setup Video & Audio Camera Settings Key framesStorage and disk management problems SettingsNo audio Poor audio qualityTechnical Specifications Installation aid Function/group Specifications Audio Audio streamingInstallation MaintenanceConnectors Performance Considerations M3.14

AXIS Q6045 Mk II PTZ specifications

The Axis Communications AXIS Q6045 Mk II PTZ is a state-of-the-art outdoor PTZ (pan-tilt-zoom) network camera designed for flexible and effective surveillance in demanding environments. This camera is part of Axis’ rich portfolio of high-performance surveillance solutions, making it an ideal choice for a wide range of applications including city surveillance, traffic monitoring, and large facilities security.

One of the standout features of the AXIS Q6045 Mk II is its powerful 30x optical zoom capability. This allows users to capture detailed images even at considerable distances, making it particularly useful for monitoring expansive areas while maintaining image clarity. The camera’s 360-degree continuous pan movement and a tilt range of -20 to 90 degrees provide unmatched flexibility in monitoring dynamic environments.

Equipped with Axis’ advanced technology, the AXIS Q6045 Mk II includes Intelligent Video Analytics. This feature enhances the camera’s ability to automatically detect and respond to incidents, generating alerts for unusual activities. The camera is also designed with Lightfinder technology, which ensures high-quality color images in low-light conditions, further reinforcing its effectiveness in 24/7 monitoring scenarios.

In terms of outdoor performance, the AXIS Q6045 Mk II is built to withstand harsh weather conditions. With an IP66-rated enclosure, it is both dust-tight and protected against powerful water jets, ensuring reliable operation in challenging environments. Furthermore, its durable design includes a heater and fan, allowing for operation in extreme temperatures, keeping the camera functional even in severe weather.

Power over Ethernet (PoE) support simplifies installation by allowing power and data transmission through a single cable, heightening the camera’s flexibility in placement. Additionally, the camera supports H.264 and Motion JPEG compression formats, making it adaptable to various network bandwidth scenarios while providing excellent image quality.

Overall, the AXIS Q6045 Mk II PTZ camera is a robust solution that combines advanced technology, flexibility, and durability, enabling organizations to enhance their security and surveillance capabilities effectively. With its wide range of features, this camera stands out as an excellent choice for security professionals seeking reliable performance in varied operational conditions.
Top Page Image Contents