Axis Communications AXIS Q6045 Mk II PTZ Axis Media Control viewer toolbar, Manual Trigger

Page 11

AXIS Q6045 Mk II PTZ Dome Network Camera

Access the Product

The product’s fans are controlled by the ambient temperature and are turned on and off automatically. If required, the fans can be activated manually by clicking the Fan button. To show the button, go to Setup > Live View Config . Under Action Buttons, select Show fan button and specify the number of minutes the fans should be activated.

Enable or disable the Gatekeeper by selecting On or Off from the drop-down list. For more information about the Gatekeeper, see page 29.

Manual Trigger

The Manual Trigger is used to trigger an action rule from the Live View page. The manual trigger can for example be used to validate actions during product installation and configuration.

To configure the manual trigger:

1.Go to Setup > Events.

2.Click Add to add a new action rule.

3.From the Trigger drop-down list, select Input Signal.

4.From the second drop-down list, select Manual Trigger.

5.Select the desired action and configure the other settings as required. For more information about action rules, see Events on page 41.

To show the manual trigger buttons in the Live View page:

1.Go to Setup > Live View Config .

2.Under Action Buttons, select Show manual trigger button.

AXIS Media Control viewer toolbar

The AXIS Media Control viewer toolbar is available in Internet Explorer only. See AXIS Media Control (AMC) on page 14 for more information. The toolbar displays the following buttons:

The Play button connects to the Axis product and starts playing a media stream.

The Stop button stops the media stream.

The Snapshot button takes a snapshot of the video image. The location where the image is saved can be specified in the AMC Control Panel.

Click the View Full Screen button and the video image will fill the entire screen. Press ESC (Escape) on the computer keyboard to cancel full screen view.

The Record button is used to record the current video stream. The location where the recording is saved can be specified in the AMC Control Panel. Enable this button from Live View Config > Viewer Settings.

AMC Audio Controls

AMC audio buttons control the speakers and microphone connected to the client computer. The buttons are only visible when audio is enabled.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Axis Q6045 Mk II PTZ Dome Network Camera Intellectual Property Rights About this DocumentLegal Considerations LiabilityLearn More SupportAxis Q6045 Mk II PTZ Dome Network Camera Table of ContentsConnectors Performance Considerations Reset to Factory Default SettingsHardware Overview Connectors and ButtonsNetwork Connector For technical specifications, seeControl Button Multi-connectorPower Button SD Card SlotColor Indication LED IndicatorsMidspan LED Indicators Green Steady when AC power input connectedSet the Root Password Access the ProductAccess from a Browser Access from the InternetClick Use Https Live ViewControls on the Live View To show the manual trigger buttons in the Live View Go to Setup EventsAxis Media Control viewer toolbar Manual TriggerSpeaker button Click to turn the speakers on or off PTZ ControlsAxis Q6045 Mk II PTZ Dome Network Camera Axis Media Control AMC How to Stream H.264Media Streams QuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamJava applet supports simplex audio with G.711 encoding Access Audio StreamsBasic Setup Set Up the ProductImage Video and AudioVideo Stream Pixel Counter264 Stream ProfilesImage Appearance Camera SettingsCapture Mode Go to Setup Video & Audio Camera SettingsWDR 1 contrast Exposure SettingsImage Settings Wide Dynamic RangeGo to Video & Audio Overlay Image OverlayOverlay Image Go to Video & Audio Video Stream and select the Image tabGo to Events Action Rules Use Overlay Text in an Action RuleAudio Input Audio SettingsPrivacy Mask Audio ModesAudio Output Audio ClipsBrowser Viewer Description Configure the Live ViewDefault Viewer for Browsers Viewer SettingsOutput Buttons Go to Setup Live View ConfigUser Defined Links PTZ Pan Tilt Zoom Preset PositionsExclude Areas ConfigurationGatekeeper AutotrackingTo add a guard tour Guard TourTour Recording To add a recorded tour Osdi ZonesAdvanced LimitsControls Control Queue Operator Same as administrator but with lower priorityMotion Detection Set Up Motion Detection WindowsDetectors Shock DetectionObject Removed Basic Video AnalyticsEnter/Exit Detector Object Counter Fence DetectorGo to Detectors Audio Detection Audio DetectionBe activated See the online help for more information ObservationsApplication Licenses Install ApplicationGo to Setup Applications ApplicationsAxis Q6045 Mk II PTZ Dome Network Camera Go to Events Action Rules and click Add Set Up Action RulesEvents TriggersSystem Input SignalHardware StoragePTZ Control Add RecipientsActions Recipient TypesRecipient Use with action Set Up Email RecipientsGo to Events Schedules and click Add Set Up RecurrencesCreate Schedules To create a new scheduleGo to Recordings List RecordingsRecording List Continuous RecordingClick Save to save and start the recording Languages IP Address Filter System OptionsSecurity UsersGo to System Options Security Ieee IeeeCertificates Date & Time To install a self-signed certificateGo to Setup System Options Security Certificates Click Install certificate and upload the certificateNetwork Basic TCP/IP SettingsDNS Configuration Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service Axis Internet Dynamic DNS Service requires IPv4NAT traversal port mapping for IPv4 NTP ConfigurationHost Name Configuration Link-Local IPv4 AddressFTP QoS Quality of ServiceBonjour UPnPTM can be disabled under System Options Network UPnPTMUPnPTM RTP/H.264Format SD Card StorageSD Card Mount and Unmount SD CardPort Status Ports & DevicesNetwork Share PortsSystem Overview MaintenanceSupport Support OverviewFile Upload Reset to Factory Default SettingsPlain Config ScriptingAxis Q6045 Mk II PTZ Dome Network Camera To max 40 V DC, open drain, 100 mA Multi-Connector Cable sold separatelyCable provides the following connectors Function Pin SpecificationsConnector Check the Firmware TroubleshootingUpgrade the Firmware Emergency Recovery ProcedureProduct is accessible locally but not externally Symptoms, Possible Causes and Remedial ActionsProblems setting the IP address Product cannot be accessed from a browserKey frames Problems with streaming H.264Video and image problems, general Setup Video & Audio Camera SettingsPoor audio quality SettingsStorage and disk management problems No audioTechnical Specifications Maintenance Function/group Specifications Audio Audio streamingInstallation aid InstallationConnectors Performance Considerations M3.14

AXIS Q6045 Mk II PTZ specifications

The Axis Communications AXIS Q6045 Mk II PTZ is a state-of-the-art outdoor PTZ (pan-tilt-zoom) network camera designed for flexible and effective surveillance in demanding environments. This camera is part of Axis’ rich portfolio of high-performance surveillance solutions, making it an ideal choice for a wide range of applications including city surveillance, traffic monitoring, and large facilities security.

One of the standout features of the AXIS Q6045 Mk II is its powerful 30x optical zoom capability. This allows users to capture detailed images even at considerable distances, making it particularly useful for monitoring expansive areas while maintaining image clarity. The camera’s 360-degree continuous pan movement and a tilt range of -20 to 90 degrees provide unmatched flexibility in monitoring dynamic environments.

Equipped with Axis’ advanced technology, the AXIS Q6045 Mk II includes Intelligent Video Analytics. This feature enhances the camera’s ability to automatically detect and respond to incidents, generating alerts for unusual activities. The camera is also designed with Lightfinder technology, which ensures high-quality color images in low-light conditions, further reinforcing its effectiveness in 24/7 monitoring scenarios.

In terms of outdoor performance, the AXIS Q6045 Mk II is built to withstand harsh weather conditions. With an IP66-rated enclosure, it is both dust-tight and protected against powerful water jets, ensuring reliable operation in challenging environments. Furthermore, its durable design includes a heater and fan, allowing for operation in extreme temperatures, keeping the camera functional even in severe weather.

Power over Ethernet (PoE) support simplifies installation by allowing power and data transmission through a single cable, heightening the camera’s flexibility in placement. Additionally, the camera supports H.264 and Motion JPEG compression formats, making it adaptable to various network bandwidth scenarios while providing excellent image quality.

Overall, the AXIS Q6045 Mk II PTZ camera is a robust solution that combines advanced technology, flexibility, and durability, enabling organizations to enhance their security and surveillance capabilities effectively. With its wide range of features, this camera stands out as an excellent choice for security professionals seeking reliable performance in varied operational conditions.
Top Page Image Contents