Axis Communications AXIS Q6045 Mk II PTZ user manual PTZ Controls

Page 12

AXIS Q6045 Mk II PTZ Dome Network Camera

Access the Product

Speaker button — Click to turn the speakers on or off.

Microphone button – Click to mute or unmute the microphone. In Simplex - speaker only mode, the Microphone and Talk buttons must both be active to send audio to the Axis product. Click either button to stop audio transmission.

Use the slider to control the volume of the speakers and the microphone.

Half-duplex mode

The Talk/Listen button is used to switch between sending and receiving audio. The button can be configured from the Audio tab in the AMC Control panel:

•Push-To-Talk mode: Click and hold the button to talk/send. Release the button to listen.

•Toggle mode: Click once to switch between talking and listening.

Simplex – speaker only mode

To send audio, the Talk and Microphone buttons must both be active. Click either button to stop audio transmission.

PTZ Controls

The Live View page also displays Pan/Tilt/Zoom (PTZ) controls. The administrator can enable/disable controls for specified users under System Options > Security > Users.

With the PTZ Control Queue enabled the time each user is in control of the PTZ settings is limited. Click the buttons to request or release control of the PTZ controls. The PTZ Control Queue is set up under PTZ > Control Queue.

Click the Emulate joystick mode button and click in the image to move the camera view in the direction of the mouse pointer.

Click the Center mode button and click in the image to center the camera view on that position. The center mode button could also be used to zoom in on a specific area. Click in the image and drag to draw a rectangle surrounding the area to be magnified. To zoom out, rotate the mouse wheel.

Click the Ctrl panel button to open the PTZ control panel which provides additional PTZ controls.

User-defined buttons can also appear in the Control panel. See Controls on page 32.

Select a recorded tour and click to play a previously recorded tour and click to stop. See

Tour Recording on page 30.

Select a PTZ preset position to steer the camera view to the saved position. See Preset Positions on page 28.

Click the Start Auto Track button to start autotracking directly from the Live View page. See

Autotracking on page 29.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Axis Q6045 Mk II PTZ Dome Network Camera About this Document Legal ConsiderationsLiability Intellectual Property RightsSupport Learn MoreTable of Contents Axis Q6045 Mk II PTZ Dome Network CameraReset to Factory Default Settings Connectors Performance ConsiderationsConnectors and Buttons Network ConnectorFor technical specifications, see Hardware OverviewMulti-connector Power ButtonSD Card Slot Control ButtonLED Indicators Midspan LED IndicatorsGreen Steady when AC power input connected Color IndicationAccess the Product Access from a BrowserAccess from the Internet Set the Root PasswordLive View Controls on the Live ViewClick Use Https Go to Setup Events Axis Media Control viewer toolbarManual Trigger To show the manual trigger buttons in the Live ViewPTZ Controls Speaker button Click to turn the speakers on or offAxis Q6045 Mk II PTZ Dome Network Camera How to Stream H.264 Media StreamsAxis Media Control AMC Alternative Methods of Accessing the Video Stream QuickTimeTM. The following paths can be usedAccess Audio Streams Java applet supports simplex audio with G.711 encodingSet Up the Product Basic SetupVideo and Audio Video StreamPixel Counter ImageStream Profiles 264Camera Settings Capture ModeGo to Setup Video & Audio Camera Settings Image AppearanceExposure Settings Image SettingsWide Dynamic Range WDR 1 contrastOverlay Overlay ImageGo to Video & Audio Video Stream and select the Image tab Go to Video & Audio Overlay ImageUse Overlay Text in an Action Rule Go to Events Action RulesAudio Settings Privacy MaskAudio Modes Audio InputAudio Clips Audio OutputConfigure the Live View Default Viewer for BrowsersViewer Settings Browser Viewer DescriptionGo to Setup Live View Config User Defined LinksOutput Buttons Preset Positions PTZ Pan Tilt ZoomConfiguration GatekeeperAutotracking Exclude AreasGuard Tour Tour RecordingTo add a guard tour Osdi Zones AdvancedLimits To add a recorded tourControls Operator Same as administrator but with lower priority Control QueueSet Up Motion Detection Windows DetectorsShock Detection Motion DetectionBasic Video Analytics Object RemovedEnter/Exit Detector Fence Detector Object CounterAudio Detection Be activated See the online help for more informationObservations Go to Detectors Audio DetectionInstall Application Go to Setup ApplicationsApplications Application LicensesAxis Q6045 Mk II PTZ Dome Network Camera Set Up Action Rules EventsTriggers Go to Events Action Rules and click AddInput Signal HardwareStorage SystemAdd Recipients ActionsRecipient Types PTZ ControlSet Up Email Recipients Recipient Use with actionSet Up Recurrences Create SchedulesTo create a new schedule Go to Events Schedules and click AddRecordings Recording ListContinuous Recording Go to Recordings ListClick Save to save and start the recording Languages System Options SecurityUsers IP Address FilterIeee CertificatesGo to System Options Security Ieee To install a self-signed certificate Go to Setup System Options Security CertificatesClick Install certificate and upload the certificate Date & TimeBasic TCP/IP Settings NetworkAdvanced TCP/IP Settings Axis Internet Dynamic DNS ServiceAxis Internet Dynamic DNS Service requires IPv4 DNS ConfigurationNTP Configuration Host Name ConfigurationLink-Local IPv4 Address NAT traversal port mapping for IPv4QoS Quality of Service FTPUPnPTM can be disabled under System Options Network UPnPTM UPnPTMRTP/H.264 BonjourStorage SD CardMount and Unmount SD Card Format SD CardPorts & Devices Network SharePorts Port StatusMaintenance SupportSupport Overview System OverviewReset to Factory Default Settings Plain ConfigScripting File UploadAxis Q6045 Mk II PTZ Dome Network Camera Multi-Connector Cable sold separately Cable provides the following connectorsFunction Pin Specifications To max 40 V DC, open drain, 100 mAConnector Troubleshooting Upgrade the FirmwareEmergency Recovery Procedure Check the FirmwareSymptoms, Possible Causes and Remedial Actions Problems setting the IP addressProduct cannot be accessed from a browser Product is accessible locally but not externallyProblems with streaming H.264 Video and image problems, generalSetup Video & Audio Camera Settings Key framesSettings Storage and disk management problemsNo audio Poor audio qualityTechnical Specifications Function/group Specifications Audio Audio streaming Installation aidInstallation MaintenanceConnectors Performance Considerations M3.14

AXIS Q6045 Mk II PTZ specifications

The Axis Communications AXIS Q6045 Mk II PTZ is a state-of-the-art outdoor PTZ (pan-tilt-zoom) network camera designed for flexible and effective surveillance in demanding environments. This camera is part of Axis’ rich portfolio of high-performance surveillance solutions, making it an ideal choice for a wide range of applications including city surveillance, traffic monitoring, and large facilities security.

One of the standout features of the AXIS Q6045 Mk II is its powerful 30x optical zoom capability. This allows users to capture detailed images even at considerable distances, making it particularly useful for monitoring expansive areas while maintaining image clarity. The camera’s 360-degree continuous pan movement and a tilt range of -20 to 90 degrees provide unmatched flexibility in monitoring dynamic environments.

Equipped with Axis’ advanced technology, the AXIS Q6045 Mk II includes Intelligent Video Analytics. This feature enhances the camera’s ability to automatically detect and respond to incidents, generating alerts for unusual activities. The camera is also designed with Lightfinder technology, which ensures high-quality color images in low-light conditions, further reinforcing its effectiveness in 24/7 monitoring scenarios.

In terms of outdoor performance, the AXIS Q6045 Mk II is built to withstand harsh weather conditions. With an IP66-rated enclosure, it is both dust-tight and protected against powerful water jets, ensuring reliable operation in challenging environments. Furthermore, its durable design includes a heater and fan, allowing for operation in extreme temperatures, keeping the camera functional even in severe weather.

Power over Ethernet (PoE) support simplifies installation by allowing power and data transmission through a single cable, heightening the camera’s flexibility in placement. Additionally, the camera supports H.264 and Motion JPEG compression formats, making it adaptable to various network bandwidth scenarios while providing excellent image quality.

Overall, the AXIS Q6045 Mk II PTZ camera is a robust solution that combines advanced technology, flexibility, and durability, enabling organizations to enhance their security and surveillance capabilities effectively. With its wide range of features, this camera stands out as an excellent choice for security professionals seeking reliable performance in varied operational conditions.
Top Page Image Contents