Epson 3300 manual PPPoE with a DSL Modem Setup, User Name, Service Name, Detect Interval

Apply	Click Apply to go back to the WAN Interface Configuration
	page. To apply all settings, click Apply on the WAN Interface
	Configuration page and reboot your router.
Reset	Click this button to clear all the configurations for this page.

PPPoE with a DSL Modem Setup

Most DSL modem users will use this mode. All the local users can share one PPPoE connection to access the Internet.

User Name	Assign a specific valid user name provided by local ISP.
Password	Assign a valid password provided by local ISP.
Authentication	Select PAP or CHAP protocol according to the feature that
	your ISP provided for widest compatibility. The default value is
	PAP. The password will be encrypted in CHAP but not in RAP.
Service Name	Assign a service name required for some ISP services.
Detect Interval	Assign an interval time for detecting if the WAN connection is
	on or off.
No-Reply Count	Assign detecting times to ensure the connection of the WAN.
	After passing the times you set in this field and no reply
	received by the router, the connection of WAN interface will be
	regarded as breaking down.
Apply	Click Apply to go back to the WAN Interface Configuration
	page. To apply all settings, click Apply on the WAN Interface
	Configuration page and reboot your router.
Reset	Click this button to clear all the configurations for this page.

42 Vigor3300 Series User’s Guide