
3.2.3 Load Balance Policy
Vigor3300 Series supports a load balancing function. It can assign traffic with protocol type, IP address for specific host, a subnet of hosts, and port range to be allocated in WAN interface. User can assign traffic category and force it to go to dedicate network interface based on the following web page setup. VoIP and VPN traffic can also be assigned to specific WAN ports.
In the Network group, click the Load Balance Policy option. You will get the following page.
Protocol | Displays the protocol used for this entry. |
Source IP | Displays the source IP address specified for this entry. |
Subnet Mask | Displays the subnet mask address specified for the source IP of |
| this entry. |
Dest IP | Displays the destination IP address specified for this entry. |
Subnet Mask | Displays the subnet mask address specified for the destination |
| IP of this entry. |
Dest Port Start | Displays the start point specified in the Dest Port Range for |
| this entry. |
Dest Port End | Displays the end point specified in the Dest Port Range for this |
| entry. |
Network Interface | Displays the interface specified for this entry. |
Edit | Click this button to open the edit page for adjusting the settings. |
Vigor3300 Series User’s Guide | 47 |