
T.38 fax relay. By enabling and configuring fax rate on a dial peer, the originating and the terminating V3300V can enter fax relay transfer mode. By using the T.38 function, customers can also save on fax expenses. Lastly, by enabling the load balance feature on multiple WAN ports, lease lines can be replaced to provide a
1.1 LED Indicators and Connection
The Vigor3300V has 4 WAN interfaces and Vigor3300/3300B+ has 3 WAN interfaces that support load balancing. This allows the system to reach peak performance and reduces the cost of maintaining a single
1.1.1 LED Indicators and Connectors for Vigor3300V
Factory Reset:
Used to restore the default settings. Turn on the router (ACT LED is blinking). Press the hole and hold for more than 5 seconds. When you see the ACT LED begins to blink rapidly than usual, release the button. Then the router will restart with the factory default configuration.
|
|
|
|
| LED | Status | Explanation |
| PWR | On | The router is powered on. |
|
|
|
|
|
| Off | The router is powered off. |
| ACT | On/Blinking | The system is active. |
|
| Off | The system is hanged. |
| VPN | On | The VPN tunnel is launched. |
|
|
|
|
|
| Off | The VPN tunnel is closed. |
|
|
|
|
| Firewall | On | The Firewall function is active. |
|
| Off | The Firewall function is inactive. |
| QoS | On | The QoS function is active. |
|
| Off | The QoS function is inactive. |
2 |
|
|
|
|
| Vigor3300 Series User’s Guide |